Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Voxelab Aquila

Everything works great inculding nozzle just wish they included clips for the tube fittings. Other kits include the clips at similar price.

This was really easy to install, and works great. The nozzle that it comes with appears to be a little better than the stock one too.

I dont understand how this works for people. The inner diameter is so small that it keeps the filament from extruding smoothly and eventually just stops extruding all together. Then you have to take it apart to get the filament out which is not an easy task because, again, the tube is so small. Ive tried everything to try to get this to work (new nozzle, new extruder, different techniques people swear work but actually dont, etc.) and it just doesnt work ever. Ive had significantly more problems since upgrading to this than I did before. At least then I could get some prints. I havent had a successful one since I installed this thing.

The cutter (not Capricorn branded) that is included in this kit does not cut the tubing with a square end. The blade wants to walk as it cuts leaving the cut tapering off at an angle. Small cuts, large cuts, putting filament in the tube or without - not a great cutter. The tubing looks like it’s legitimately the real stuff, the nozzles and silicone boots are generic.

I was really excited that it had they cutter piece so Id be able to have a square cut edge, but the one I got didnt seem to do that very well. Didnt come with any instructions either which couldve been nice.

With this Capricorn tube, your filament guides easier to the point head. Ive noticed less clogging as well. All the extras in the kit are great, too.

I upgraded my Ender 3 Pro (Super easy to install) with this and a hardened steel nozzle and it is working great. I had to adjust my settings though to get it looking good as well as relevel my bed and Z Offset with my BT Touch as the nozzle isnt the same length as the old one. Im pretty sure the majority of the reasons I had to redo the settings was because of the new steel nozzle, but a different tube is a different tube, so.... And here is what I had to set things to after the upgrade for PLA. Bed Temp: 50 - 60 (I use glue on a glass bed) Nozzle Temp: 210 Print Speed: 60% Ill be using HTPLA here soon and Ill update after I nail the settings down.

Install was easy, it gave me one good print…..then clogged up with a vengeance every attempted use afterward. Looking into a refund cause the tube that my printer came with is infinitely better

I had an Ender 5 stock for about 2 years, but after an unfortunate accident where I damaged my bed and the nozzle sheered off when attempting to remove it, I took the dive into all the upgrades I wanted. This was an easy choice, great price, and I am happy with the product.

Totally had a spider in the manilla envelope that was inside the Amazon packaging. I was able to capture the individual but I did not take any prisoners. But on the real, spider in the packaging...alive. I guess everything is here...i mean, I guess.