Cut Away Machine Embroidery Stabilizer Backing 8x8 - 100 Precut Sheets - Medium Weight 2.5 Ounce - Fits 4x4 and 6x6 Hoops
-
C. J. Seashols
> 24 hourJust what I wanted at a good price!
-
Byron Stanislav
> 24 hourthe wife is just learning embroidery. this is what she wanted and she says it seems to be working out great. she also said its a great buy. she is enjoying using it. i am sure she will be purchasing more soon.
-
bvksg
> 24 hourWorks well, good price
-
Pamela B.
> 24 hourGreat to use for small embroidery areas or projects. It is not adhesive, but hoops easily and gives good support. I used it for embroidering Christmas cards and it was a real time saver not to have to stop and cut stabilizer for each card.
-
Alize Hansen
> 24 hourIt tears cutaway should not tear. Contacted customer service, was issued a replacement. Happy with the solution.
-
TooMuchStuff
> 24 hourI usually use the tear away stabilizer, but so.e of my larger embroidery designs cause puckering... itsjust not enough. This works great - the design lays out flat & no decernable puckering. For some face coverings/masks I leave it intact (dont trim it around the design). It gives a bit more structure and adds an additional layer of fabric (may be nice for winter). Overall, this works great & isnt hard to get seated in the hoop (not too thick)
-
Bridgid
> 24 hourThis whole roll of cutaway stabilizer is wrinkled. It looks like the roll was squeezed. If you are using a thin fabric, I think the wrinkles would show through. I wont be buying this again. For now, I am using a 2nd layer of normal cutaway over it, just so I dont waste it. Disappointing.
-
Chris
> 24 hourGreat value for wide stabilizer
-
Roseann
> 24 hourUsed this to applique some designs on toddler t-shirts with my machine and it held up well - no puckers!
-
brenda dollhopf
> 24 hourStabalizer for quilt blocks for a baby quilt. Size was large enough to fit the large hoop. Will order again
How to Choose the Right Type of Embroidery Stabilizer for Your Fabric?
A stabilizer used to support the fabric during stitching to avoid the puckering and stretching is an essential for machine embroidery. Generally, stabilizers are classified as cut away, tear away, wash away. Here we will direct you to choose the proper stabilizer for your fabric and design among New brothread machine embroidery stabilizers.
Tear Away Embroidery (Medium Weight 1.8oz)
Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.
It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather...
Cut Away Embroidery (Medium Weight 2.5oz)
Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.
Cut away stabilizer is considered the most stable stabilizer.
It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.
Wash Away Embroidery Stabilizer (Light Weight 1.5oz)
If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.
The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.
Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.
No Show Mesh Embroidery Stabilizer (Light Weight 1.8oz)
No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design.
No show mesh stabilizer is recommended for light colored fabrics.
It is extremely soft for baby garment and some fabric when soft is a very important consideration.
Water Soluble Topping Film (Light Weight 25Mircon))
Water Soluble Toppings are used only on the top of the fabric to control the nap of the fabric. It is best used on napped fabrics such as towels, knits, velvets, or velveteens to prevent the stitch sinking into fabric. They are too lightweight to be used as the backing stabilizer.
Fusible Iron On Embroidery Stabilizer (Light&Medium Weight)
Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.
Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.
Black Machine Embroidery Stabilizer Backing
Black embroidery stabilizer is very useful on similarly colored garments or fabrics.
New brothread supply 3 kinds of black embroidery stabilizer: black cut away, black tear away, black no show mesh.
Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing
Sticky Tear Away Embroidery Stabilizer is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue.
New brothread Machine Embroidery Stabilizer Series
|
|
|
|
|
|---|---|---|---|
Cut Away Embroidery Stabilizers
|
Tear Away Embroidery Stabilizers
|
Wash Away Embroidery Stabilizers
|
No Show Mesh Embroidery Stabilizers
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer | |
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer |