D&D PowerDrive ORB-H-1101 Cub Cadet MTD 754-0461 954-0461 Kevlar Replacement Belt, 1/2 x 78, 4LK Section, Rubber

Tested it on a few acres and so far so good. Seems like good quality. Replacement is a bit of a pain, so a good belt is worth the extra $$$!!!!

Seems like it’s made well.

Was nearly half the price than Tractor Supply store an very good strong quality.

This kevlar belt is the best for the money. It fit my Cub Cadet and made it drive like new.

I have used the D&D power drive belts for a few years now on deck drive and wheel drive applications. With that being said, I have never had one of them fly apart. Installed properly the belt will last a long time. Installing the drive belt is suggested in the owners manual that you have a professional do the work, Im no professional! What you need to do is drop mower deck and remove. Raise front of tractor and use jack stands or similar for bracing. You will need a 1/2 breaker bar or impact and a 15 inch adjustable wrench to remove blade clutch off of crankshaft. Place wrench on double flats just above bolt head in shaft. Use breaker bar or impact to remove bolt and clutch assembly. You may need two sets of hands for this. Replace drive belt in same configuration it came off. There is a picture in manaual that should show routing of belt around idler pulleys in middle of frame. When placing clutch assembly on shaft it helps to feed belt on to pulley at same time. DO NOT re-tighten bolt with impact, use a torque wrench and torque bolt 36 to 50 foot pounds. I went down the middle on specification. Reinstall deck, done!

The belt I needed for our cub cadet lawn mower. Exact size.

worked great for my cub cadet lt1050. seems like really good material. size was accurate.

Better than OEM

Good so far!

As expected