EANOSIC Upcut Spiral Router Bits 1/4 inch Shank, 1/4 inch Cutting Diameter Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving, Edge Trimming

This is a 1/4 inch Shank Upcut Spiral Router Bits with a 1/4 inch Cutting Diameter made with Solid Carbide with Nano Blue Coating. Im using it in my CNC End Mill for Wood carving/cutting. This bit is sharp and since its an upcut bit it pulls the sawdust up out of the cut leaving a smooth bottom but leaves the sides a little rougher. This bit works good and a little sanding cleans up the minor imperfection on the sides of the cut.

This bit will speed your cutting projects when using a router. It provided a clean cut and stayed sharp.

I have several EANOSIC bits and they have all worked well for me. I figured this bit would work just as well as the others and it didn’t let me down. It cuts smooth and clean. I don’t think you can go wrong with any EANOSIC bits. I highly recommend them.

Im using this in my router for plunge cuts and not a CNC, but this bit works great. Its sharp, and it gives me clean and consistent results thus far. I really like it. Its a good deal, too (at ~$17.00 USD).

Super cutters. I stick to this supplier now, the end mills last long on plastics and wood. I do only light jobs on aluminum, they work on aluminum too.

Amazingly good product. Absolutely satisfied. Thanks!

This upcut spiral 1/4 router bit came in a standard plastic end mill case that protected it during transit. However, the case had no labeling on it and the bag it came in was rather cryptic as well. The first thing I did was label the small case. The nano-blue coating covered the top end of the bit evenly and cleanly. The spiral bit cut down to create grooves for mortises very nicely and easily. Also, the same for several dados I cut in walnut and maple. The top edge was just ok but that is to be expected in a upcut bit. The upcut does clear away debris nicely. The bit was sharp and stayed that way through the jobs I have done so far. Very Decent bit that should serve me for quite a while.

I bought this bit instead of the Whiteside brand I usually get. I figured to give it a try as it is 1/2 the price. So far I am very happy. I did a couple carves and It worked so well I bought the compression bit. Why get the more expensive bit when this one appears to be working just as well? I love the longer 3 length. I would like to see a 3 1/2 or 4 length. Im a believer is EANOSIC.

This is a good quality upcut router bit. The bit is nice and sharp and spins perfectly in my palm router. (in my CNC). The bit comes in a standard bit tube and stores nicely along side your other bits. I have used this bit only once, but I have the same sized EANOSIC downcut bit that I have been using for months now and its cuts and quality are still very nice. So I am expecting the same from this upcut bit. I am very happy with this bit.

This EANOSIC carbide upcut 1/4-inch diameter router bit is well-made and sharp. I am using it to make grooves and slots in aluminum on a small CNC mill. It handles the material without issue. The bit comes with a nano-blue coating that should help dissipate heat and lengthen bit life. The end mill’s shank is labeled with the bit’s size and type information, which makes it easy to identify. So far it is working well, and I am glad to have in my selections of router bits.