ELEGOO Mercury Plus 2 in 1 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

I order the Elegoo Wash and Cure machine because I was tired of the mess of removing resin covered parts from the build plate. Being this shipped from Amazon, I received it next day. I am so happy I bought this. Cleaning parts/models after printing using the Elegoo Wash and Cure machine has saved the mess. It is quick and easy to clean parts, usually takes about 2-2 1/2 minutes for parts to be cleaned and way less of a mess removing them from the plate after. The curing cycle is just as fast taking roughly 2-3 minutes for most part. I also found that this machine will also accept the build plate from the newly released Anycubic Mono SE resin printer, which makes this a versatile machine not just for Elegoo resin printer owners (Martians). Considering the price, this machine seems to be well built. I have been using it for only a few weeks now and can say it does everything as advertised. Elegoo is a quality brand and their customer service is amazing. I have 2 of the Mars printers to go with this Wash and Cure machine and I can say I am very please with their service anytime I have had an issue. You cant/wont go wrong if you pick this machine. I highly highly recommend this machine.

Product has worked really well and I have to say the customer service has been on point. When it arrive I had a small part that had been broken in shipping, and one email to them was all it took to fix it. They responded very quickly and within hours I had a tracking number for the replacement part. Small problems like this will always pop up, but its how the company handles it that makes the difference. Will definitely buy from them again.

I’m loving the Mercury Plus. Like everything Elegoo does they take a concept and make it better. It has streamlined my cleaning and curing process.

I have been resin printing for a couple of months now. I dislike the cleanup involved and have seen similar machines that were just too expensive. I think this one is definitely worth the $120 price tag. I personally would not pay more than that though. I mostly decided on this because I had been wanting a better washing/curing setup. I was looking at spending around $90 to copy a friends setup when I saw this. It just seemed easier. I use 70% IPA to clean my prints. I have noticed less residue on prints since using this machine. I think leftover residue was caused by my method of shaking and brushing which was just not long enough to reduce white residue. This machine has simplified that, I am able to increase the wash time by pushing a button. I have no complaints about the washing settings. The cure lights also work well. So what do I like about this machine? I think the price is good, (less would be better), results of cleaning are better than my old method, build quality is nice, and it easy to use. Now for things I do not like, which honestly have nothing to do with workflow or how easy the machine is to use, it really is a great machine. The buttons to switch between modes are really loud. Maybe there is a way to turn it down, I have not found that option though. The noise of the machine is not bad when running; however, when the fan starts to spin it makes a high-pitch noise that is really loud before reaching speed and quieting down. I really think for $120 they should have included a second container and one with a better quality lid. The lid works and does not leak, but it feels cheap when compared to the rest of what you get. I think if you are on the fence about investing in one of these and you do a ton of printing like me, just pick one up! You will not regret it.

Elegoo is a very reliable and affordable 3D printers brand. Printing results are absolutely amazing. Support serivce from their official website is very reliable as well.

Great device! However, it would be even better to allow the cure phase to be set in complete revolution counts instead of timed :30 second intervals. The way it is now, 30 seconds equates to about 2/3 of a revolution. So some of the part is going to get overlapping exposure. Probably not a huge enough deal to fuss about, but it would help to dial in the correct exposures for new/unfamiliar resins.

I used to cure my resin prints with cheap UV lamps and cheap rotating plates. Thank God I upgraded to this. The dual function is the best feature of this product. You can clean and cure your prints with the same machine, how cool is that. Again, stop using cheap alternatives, and get this, youll see the difference immediatly. Plus it looks super cool next to my Mars Pro!

The machine is really nice. I have paired it with an Elgoo Mars 2. One thing to note, that the wash tub is not the same volume as the Elgoo Mars 2, so it is possible to have prints that are too large for the was bin. Im taking a point off for the quality of the wash bin & lid. This is a very poor clone of a kitchen tupperware container. The latches are poorly formed and im certain that the retention bars will snap off sooner rather than later. Its the single largest defect in the machine.

Bought as a Christmas gift for my son. We have some previous fdm printing experience so there was a little less of a learning curve. After set up which was quick and painless we printed the rooks on the flash drive with no issues. Then came time to update the firmware to be able to use the slicer program......that was a bit of a pain. The slicer has a bigger learning curve than the old cura program I was used to. But eventually we got it all done and set. And this system works great. Produces nice clean prints with little to no effort. And the wash and cure station works like a dream. Clean and cure prints in a snap.

I just started 3D printing and I couldn’t imagine spending an exuberant amount of time hand washing and waiting for the prints to cure with the sun. This simplifies everything so you can print 24/7 and never slow down. Cleans and cures in minutes.