EPAX nFEP Film Sheet 200 x 140mm Thickness 0.125mm for E6/X1 and Other 5.5/6 inch UV Resin 3D Printers, Pack of 3 Films

Seriously this just makes your printer better, since it doesnt stick to the fep, supports break less often meaning less failed prints.

Well I have always been skeptical of the rebranding of this film as “nfep”. So recently I did a few upgrades (Kapton Tape, fresh grease) and decided to swap the very cheap FEP with the more expensive nFEP. Well 10 plates later and everything is printing… not a single fail. I usually get 90% or better but this is noticeable. Call it what you want , it’s working and that’s what matters !

I replaced my factory FEP with this one and it just so smooth. After I re-leveled my printer everything just came out FLAWLESS

I bought cheap FEP film and every print had something fall off the build plate and 2 sheets of the cheap FEP were damaged by the failed prints. THIS nFEP fixed that issue. Every print so far (4) has been beautiful.

film seems really good but my package came practically bent in half bending the films

Im new to 3d printing and of course my first 3 prints failed. I installed one of these nFEP sheets and have not had a failure since! Excellent product!

Using this for almost a year and its works great!

Works great, nothing sticks to it, seems a little tougher then standard fep sheets.

Was excited to get some nFEP film for a newer Resin printer. These arrived like junk mail. Stuffed haphazardly into an envelope and bearing enough dust and debris between the sheets to permanently scratch and mar them prior to my being involved. Subsequent prints were initially of a satisfactory quality but the nFEP film would not survive up to a 3rd print. Find another seller, perhaps order directly from the manufacturer with the hope that their packaging and shipping arent detrimental to the product.

NFEP has more flex and better adhesion resistance. This makes changing the film easier since you dont have to worry about tensioning the film correctly. I just slapped it on and tightened it down and it works perfectly every time!