EZtar Reflective Tape, 2 × 12 × 10 PCS Red & Silver High Intensity Self Adhesive Waterproof Trailer Outdoor Safety Caution Reflector for Cars, Trucks, Trailers, Boats, Road Signs

I park my car near the road and feel like the more visible it is, to drivers passing by, the better. I applied a couple of these to the bumper. I cleaned the bumper with alcohol before attaching the reflective strips. They are well affixed and should last for quite a while.

Seems like nice sticky tape. I like the design and think it’s nice It works as Expected It’s easy to use and reflective. I like the overall look and it seems pretty useful for reflection at night Overall I think it works well

These are nice stickers that I am using to replace damages reflectors on a car trailer, I will also add side reflectors on a smaller trailer. The back is very sticky and they should hold as well as the original factory version. There is an included smoothing tool, but fingers work just as well.

I installed these in a few places, inside my trunk lid to give some reflectivity if its open on the road, on my trailer, and also on a hitch mount cargo carrier. Adhered well to all of the surface. Just be sure you clean the surface properly first, with something like isopropyl alcohol to remove dirt and grease prior to installing.

This conspicuity tape is as good as any other tape I’ve used. It has very good adhesion and the reflectivity is fantastic. I don’t know the letter of the law, but this tape does not identify that it is DOT-C2 approved. The listing says that it complies but the tape itself does not indicate it. This may not be an issue but wanted to call it out. I will use this tape to mark my 18’ car hauler which is rated to 7,000 lbs. Due to the weight capacity, this tape is not required, but why wouldn’t you want it? It’s cheaper for the trailer maker to cheap out and not apply it, but for this low cost, the extra risk reduction is worth it. If you are applying this to a trailer, the white block goes toward the front, red, toward the back. Begin and end at the ends of the trailer. If you have a dry van, the upper corners on the back should only be outlined with the white, no red there. Some of the pictures in the listing are wrong. If your vehicle requires this tape, at least 50% of the side length needs to have the tape. These precut lengths make it easy. Just put one on, skip a foot, then apply another. I like that this came with the plastic tool to press the decal down well. It should go without saying, but make sure the surface is clean before applying. Wipe with alcohol if needed to remove road roils and grease.

This is anic s et of self adhesive highly reflective tape strips. Included is a plastic spatula to help press the adhesive strips onto the surface. ai use these on my boat trailer to improve its visibility at night in traffic. The size is large enough for them to be easily seen at quite some distance.

I first became familiar with DOT-approved tape when black carbon fiber paddles, easy to lose in Wisconsins tannin-stained waters, became popular. I got that tape when a truck-driver kayaking companion suggested that I put tape on my blades to make a paddle dropped in the water much easier to find. This tape is identical, highly visible with a sticky backing that is completely waterproof. It is very versatile - good for trailers, bike racks, driveway markers, mailboxes, etc.

These large reflectors have a good adhesive backing. One half is red one half silver, and they have alternating stripes in each field. At night the reflection is quite clear, and they draw attention to whatever vehicle is illuminating them. I havent tried it but given the material its quite likely you could cut it down to different sizes if that was your need. They come with a burnishing tool to make sure the application is bubble free. You can use them individually as I did or as a continual stripe along a longer surface.

Highly visible great reflections there are enough reflectors to put in various areas. Very nice

Nicely reflective. Adhere well if you clean th surface you are putting it on.