EZtar Reflective Tape, 2 × 12 × 10 PCS Red & Silver High Intensity Self Adhesive Waterproof Trailer Outdoor Safety Caution Reflector for Cars, Trucks, Trailers, Boats, Road Signs
-
H. Kimbrell
> 3 dayThese adhere great and are very reflective. Holding up great in our south Florida weather.
-
J. Warren
> 3 daySeems like nice sticky tape. I like the design and think it’s nice It works as Expected It’s easy to use and reflective. I like the overall look and it seems pretty useful for reflection at night Overall I think it works well
-
Triple R Ranch
Greater than one weekThese work well for landmarks out in the country. Theres no light pollution out here so its very hard to see certain landmarks or even your driveway. Just remember to put them at headlight height. If theyre higher or lower, theyre not very visible. If ya remember to do that, they work great! The adhesive is not as strong as I would have expected an item like this to have but so far they are staying up. Price is fair on these as long as they continue to stay up. (I will update this review IF they dont)
-
djn
> 3 dayThis conspicuity tape is as good as any other tape I’ve used. It has very good adhesion and the reflectivity is fantastic. I don’t know the letter of the law, but this tape does not identify that it is DOT-C2 approved. The listing says that it complies but the tape itself does not indicate it. This may not be an issue but wanted to call it out. I will use this tape to mark my 18’ car hauler which is rated to 7,000 lbs. Due to the weight capacity, this tape is not required, but why wouldn’t you want it? It’s cheaper for the trailer maker to cheap out and not apply it, but for this low cost, the extra risk reduction is worth it. If you are applying this to a trailer, the white block goes toward the front, red, toward the back. Begin and end at the ends of the trailer. If you have a dry van, the upper corners on the back should only be outlined with the white, no red there. Some of the pictures in the listing are wrong. If your vehicle requires this tape, at least 50% of the side length needs to have the tape. These precut lengths make it easy. Just put one on, skip a foot, then apply another. I like that this came with the plastic tool to press the decal down well. It should go without saying, but make sure the surface is clean before applying. Wipe with alcohol if needed to remove road roils and grease.
-
P. Gruhn
Greater than one weekSticky stuff on the back is sticky. Using for my mailbox I am in a dark rural area so this helps finding the driveway. I used a razor to peel the backing off. Sticks well to the plastic mailbox. See no reason why it wont stick well to other surfaces. 5-stars
-
MED-REK
> 3 dayWe often walk to the store in the evening and carry our groceries in a black backpack. Our reflective vests work fine for cars in front, but cars behind can’t see the vest when we wear the backpack. I saw the listing for the EZtar Reflective Tape that said it would work on a raincoat, and I figured that meant it should work on a canvas backpack. We attached one piece of tape to each side of the backpack and cut a third piece to go on the front of the backpack. The tape went on easily, but it feels like the sharp corners of the tape might peel off the canvas. Only time will tell how well the EZtar Reflective Tape sticks to a canvas backpack, but for now we know we are clearly visible to vehicles regardless of which direction they are driving. As you can see from the photo, shining light on the reflective strips really gets a strong visible response. As long as the strips stay attached, it will make nighttime walks from the store safer.
-
Avid Reader
> 3 dayThese large reflectors have a good adhesive backing. One half is red one half silver, and they have alternating stripes in each field. At night the reflection is quite clear, and they draw attention to whatever vehicle is illuminating them. I havent tried it but given the material its quite likely you could cut it down to different sizes if that was your need. They come with a burnishing tool to make sure the application is bubble free. You can use them individually as I did or as a continual stripe along a longer surface.
-
Jasmine
> 3 dayHighly visible great reflections there are enough reflectors to put in various areas. Very nice
-
BIN929
Greater than one weekTen pieces of 2x12 reflective stickers perfect for trailer or any object needed to be visible at night. Peel and stick application with a plastic tool to smooth out air bubbles.
-
Jimbo
Greater than one weekI installed these in a few places, inside my trunk lid to give some reflectivity if its open on the road, on my trailer, and also on a hitch mount cargo carrier. Adhered well to all of the surface. Just be sure you clean the surface properly first, with something like isopropyl alcohol to remove dirt and grease prior to installing.