Fancierstudio Heat Press 15X15 Sublimation T-Shirt Heat Press New Model Lower Platen Slides Out 2.5 Inch Model FS15x15 NB

Fast shipping, easy to use.

Stop working after a week

Top plate is loose, I am exchanging it in hopes to get a one that is not loose.

When I used the press for the first time, I had it set on 350 for 60 seconds. The vinyl was not HTV, but a Iron On vinyl, that I purchased very quickly from Walmart. I have other HTV vinyl, but I wanted to try this brand out first, just to see if I should order it again. Needless to say, I had to turn the temperature up to 375, and it still would Not stick to the t-shirt - only bits and pieces. Therefore the first shirt was not a success. So from this point on I will be using my Siser HTV... Otherwise, the hat gets very hot...

Easy to use easy set up not to heavy

After careful research from many small business owners this product did not disappoint. The customer service was 5 star. You will not will be sorry.

For the price, this press works really well! The temperature is a little off (mine runs about 25 degrees hotter than what it’s set to), but if you just use an IR temperature gauge you can easily figure out how to adjust it. There is about a15-25 degrees variation from the middle of the platen to the edge, so I tend to adjust a couple degrees hot to find the perfect balance. In application this difference doesn’t make a huge problem. Pressure is also pretty even, not perfect, but dang close, and much better than my previous heat press from Wish. I have been using this for sublimation for the last few months and it works really well. Not flawless like you expect a $2000 machine to be, but for less than a tenth of that, this machine is amazing! Timer works perfect too!

Very disappointed. I’ve only had this press for 2 months and the timer no longer works.

Purchased through Amazon Warehouse and saved about $20, said the packaging might be damaged but it looked fine on arrival. Arrived in overall good shape, but missing the Teflon sheet and no setup/operating manual. The bottom plate wasnt aligned and square with the heat platen, but was able to loosen the mounting screws and square it up. Will be firing it up tomorrow, will update the review then. Have also reached out to the supplier regarding the missing parts, awaiting a response. UPDATE 5/29/21: Messaged the manufacturer thing through their FB account, received a response within a few hours. They pointed out that the press was purchased used through Amazon Warehouse and not through them. They provided an electronic copy of the manual, and links to many setup and usage videos from their YouTube account. They are also sending the missing Teflon sheet as a goodwill gesture, thats some solid customer service. Have used the press a half dozen times so far, works great and produces quality finished products. Have used both HTV and sublimation prints, great results for both. Using my IR temperature gun to measure the platen temps versus the controller settings, within 10°F of setpoint and consistent throughout the platen. If you need to use an extension cord to power this unit, keep it as short as possible and 12AWG size. Undersized or long extension cords will contribute to issues with the controller or press failure, and also create a safety hazard for your home or business.

If i could give 0 stars I would! Came completely rushed beat up, paint missing and huge sharp pieces of metal sticking out of it.