FastCap Solo Thick Adhesive Refill (2.25 Ounces)

I love this stuff. It’s holding power is no joke! I use it with and without the accelerator for so many different things in my woodshop. I will buy more and more.

I have only used this for small parts like molding returns and to tack things in place wile the tight bond sets so the parts dont slide around when I tighten the clamps> I wish I had discovered it before I retired.

used Fastcap 2P10 for many years, its great for woodwork

Best adhesive ever! Not much working time- you must be prepared to align materials immediately.

This is going to be my go to glue. You get quite a bit of glue for your money. It is strong, but if you goof and have to remove the screw you used it with, or whatever, Ive been able to do it. So, its strong enough to hold (probably permanently), yet if the need arises, and you have to uninstall the metal item that you used it on, you can, with hand tools and some effort, reverse the job. I also like the consistency of the gel. It tends to stay where you put it and not drip..not that it wont drip if you use way too much, but it hangs in there quite well. Ive used it to repair just about every plastic shelf in my refrigerator and have found that it not only produces a fine, strong repair but if you are careful not to apply excess glue, the repair is almost invisible. I have two cons that have nothing to do with the glue. As you can see on the product photos, the container is tall and thin. This makes it prone to be knocked over, especially since the spout works the first time you use it but is unduly difficult to clean out and use again. So, you unscrew the cap, usually requiring a pair of pliers, and access the glue with a cotton swab, or whatever will fit. At that point you face the decision of whether to apply the glue which is then hanging on the end of your swab, or somehow set it down and screw the cap back on the bottle, then apply your adhesive. Ive usually chosen the first option, which works great, except, careful as I am to put the bottle of glue out of the way, Ive spilled it. It took 30 minutes to (about 5 minutes, post-spill) use various household cleaners, scrapers, and steel wool to remove it from my hardwood floor. However, the clean-up worked. I wouldnt dream of using acetone on most spills. It would most likely do the job, but the risk of surface damage would be high. The second spill was purely due to my stupidity. I set the cap of the bottle right down on the hardwood floor but caught it quickly and in 5 minutes, the glue was gone and the floor was not damaged. Summary: Really great glue, obviously engineered to be strong, yet easy to use. Its 100 times better to work with than super glue (and I think as strong, or stronger). Con...the bottle is too easy to knock over. Whatever happened to the glue pots of yester-year? Finally, if you have a large bolt or some other heavy object that the glue bottle will just fit in, that will solve the spill problem, even a small wood clamp should sufficiently stabilize it.

i use it to bond pvc decking along with the 2P-10 Activator (spray) product. it really is amazing and allows me to create mitered cuts (without cutting all the way thru the decking) along with a heatgun to soften/bend decking then bond the edges with 2P-10

I have the FastCap glue assortment kit, the thick adhesive seems to dry out within a six month period and much faster than the other viscosity glues. Works really well and is one of my favorite glues. I like the thick adhesive because it stays where you put it without making a mess.

This is probably the best glue I have ever used. It’s super glue for wood, or anything else that needs to be glued. I have glued glass and the cured glue is as hard as glass. With the activator the glue is fully cured in less than 20 seconds or use without activator and cure time is approximately 4-5 min. I will always have this glue on hand. I make a lot furniture, ie…coffee tables, end tables, corner cabinets, large clocks, picture frames etc and after 3 years I just bought another bottle. It really goes a long way.

You dont actually need to activator. The activator just dries out the solvent in the glue faster. It really is a great product. Slightly superior to number two TiteBond three. Both are excellent I think this one which is an epoxy would be better for outdoor applications but I assure you both are excellent glues!!

It works as advertised! It is a challenge to use with a complicated or complex glue up but is great were the use of clamps requiring jigs and holding aids is necessary.