













Flexible Heat Resistant Silicone Rubber Sheeting, High Temp,Smooth Finish, Red 1/8 by 12 by 12 inch
-
Rusty Steuber Sr.
> 3 dayUsed on clean out plates on a pellet stove. great seal and holds up better than the original gaskets
-
Elli Deters
> 3 dayI have cut out and replaced nearly every gasket on my pellet stove with this product. The thickness and durability of this silicone aids in its ability to seal. It cleans easily with soapy water and when both surfaces are clean there is a slight adhesion affect. It definitely sticks to flat side plate covers when they are removed for cleaning. Removed, cleaned and reinstalled these gaskets at least 12 times this past winter. Besides some discoloration, they are no worse for the wear.
-
Elmo
> 3 dayIve been using this now for about 6 months on my Cub Cadet (Kohler Engine) mower valve cover. You can only buy cork gaskets for some reason, and these motors are notorious for leaking oil at the valve cover. I cut a gasket out of this rubber and Ive been leak free since.
-
GetItRight
> 3 dayBought this pad to use to isolate the vibration on a Kubota RTV exhaust bracket(s). Seem to be holding up and no vibration or cracking yet. Wife took the rest and thats setting on the counter top next to stove.
-
jose L.
Greater than one weekMuy buena calidad para los empaques de mi Toyota 4Runner 1993
-
J & G Simons
> 3 dayI used some of this to seal a hole in my exhaust, still holding after two months.
-
stebben357
> 3 dayWorks great!
-
Anthony O'Conner
> 3 dayI bought this because I didn’t want to spend a fortune for the sublimation pads needed to press slate. It worked! They turned out great.
-
photo guy
> 3 dayseem well made and plenty thick for oven use .
-
Robert C.
Greater than one weekIf youve ever used a brake pressure bleeder then you know youve got to have a perfect seal between the bleeder top and the master cylinder reservoir. Well, there are a number of master cylinder reservoirs out there (re: Wilwood) that no bleeder top exists for, and since many of the cars that come through our shop have Wilwood brake systems we decided to make our own custom bleeder top, and the silicone sheet was used to make the gasket. It works perfectly and since its silicone the brake fluid wont eat destroy it. I also liked the variety of size choices they had available, it made finding what we needed much easier.