

















FLEXIMOUNTS 12-inch-by-72-inch 2 tier Wall Shelf Garage Storage Rack Wall Mounted Floating Shelves,1x6ft ,Black, 2-Pack
-
Jeff B.
> 3 dayManufactured in VietNam. Good value for the money. These are two (2) sections of 36 shelving mounted side-by-side. Not one 72-inch length. Rather than attempt to align shelves with drywall studs in my garage, I just mounted the shelving to 3/4 x 6 wood furring strips. Shelving is well made. Clean edges. Good fit and finish. Best suited for storing large objects. I used for leaf blower, line trimmer, etc. The wire mesh grid is essentially a 3 x 4 open square pattern. Smaller objects fall through. Brackets are excellent quality. Lag bolts are good quality, but diameter/sizing off. Not uniformly metric/American. You might want to toss away manufacturers fasteners. Instruction diagrams are poor. Make sure to layout left- and right-side brackets correctly before mounting to wall. The Fleximounts label goes to the outside of each bracket. Label on left side = left bracket. Label on right ride = right bracket. Otherwise with (8) eight brackets, it can get a little confusing. Small Velcro ties (2 per unit) have only limited value in stabilizing the shelf in its bracket mount. My preference would have been to purchase two 6-foot long shelves instead of four 3-foot long units.
-
goodboy4911
> 3 dayThese are really well made, they also seem very sturdy. The screws are super heavy duty so you can lag them into the studs.
-
James Cayton
Greater than one weekLike just about everything there is about these shelves. Super easy to install and very strong. Only complaint is they come with flimsy Velcro hold down but that is easy to over- look
-
Jon
> 3 dayWorked great, installation was straightforward. The shelves are sturdy as long as you install into wooden studs. Theres an included cardboard measuring guide that helps a lot. They helped clear up much needed space in my garage.
-
Mank
11-06-2025Read some of the other reviews that mention the awkward spacing of the supports. They are correct, the shelves will have gaps between them. They won’t end up looking like the picture they use. Two 3 ft shelves will take about 7 ft, not 6 ft. This worked fine for my purpose, and the shelves and study. But if you are a perfectionist or have OCD, these might drive you crazy. And the template they supply is only 2 ft long. So if you place your supports 32” apart, the template isn’t long enough.
-
Matt Gates
> 3 dayHad to call for (easy) instructions and they texted a .pdf
-
Noel G.
> 3 dayThe shelves feel very solid and are easily handling storing all my heavy paint buckets. I installed them nicely making use of space under my garage door sliding track space. They are said to be able to handle 300lbs and in my assessment appear to do so easily. Not only are they nicely engineered and very study, but look good as well. A little on the pricier side for shelving, but worth the investment in my opinion.
-
Gordon
08-06-2025I installed in the garage the HyLoft before and thought I try those ones for the laundry room. Installation is the same as before, check where the studs are and mark your drill points, drill and screw in. I do not like the movement of the shelf base. They added some Velcro bands to fix it in place but that’s not an elegant solution. The HyLoft have a clip at the back which is not really visible (so better than those ones here). Beside that they are strong enough and do the job.
-
KD
> 3 dayLove these! When you measure, ideally note where studs are first to see how many you can accommodate. As others noted, a standard drill or screwdriver wont work with these bolts so you will need a lug nut and drill adapter or lug nut and socket wrench.
-
Allan in Sedona
> 3 dayThese are serious metal shelves. Installed easily with all needed parts included. I installed 2 sets which were enough to hold all of my parts boxes. They look good too. In the past I’ve used those little white metal ‘triangle’ supports. No comparison.