KAKUSIGA Compatible for ipad 4th Generation Touch Screen Glass Digitizer Replacement, Home Button Flex, Adhesive Tape, Repair Tools kit (Black)

This kit came with everything you need to replace the screen. The instructions are pretty simple but you will need a heat gun.

It worked

I have replaced screens twice... instructions are simple and easy to follow and the touch screen works great. Only issues is the adhesion of the screen, especially on the left side where some of the cables bend over and push up. Need to increase/improve adhesion on that side.

The product is great, no complaints. Installing anything into an Apple devise however is another story.

The product works great. I’d recommend buying a separate install kit as the one included had flimsy pry tool that did not really help me lift the screen. It was too thick to wedge under the screen. Because the right side of my screen was smashed, I had to spend 1.5 hours pulling away little pieces of glass. But once I removed the screen everything went pretty quickly. I’d also recommend watching some YouTube videos to prepare.

Easy to install but it should have glue in there because some parts need to be glued back together. However, the price is very cheap. Other than that a great product.

I installed this but the touch screen has dead spots. No way I can seal it up, so now I have to order another digitizer from somewhere else and go through the trouble of disconnecting the original home button again that I sealed to the new defective digitizer. which is essentially worthless.

This digitizer worked great. Touch worked, home button worked, fit great. However the preinstalled adhesive strips would not stick. I removed all of the old adhesive and cleaned the surface with alcohol before installing the digitizer, but one corner and side kept popping up. So, I used some B-7000 adhesive to hold the screen in place.

Liked it was cheap

Replacement was no problem. Tools included, worked out great