KNIPEX - 62 02 200 Tools - High Leverage Bolt End Cutting Nippers, Multi-Component (6102200)

but feel good in hand and bought cut nails in attic came through when rofers came and works well on that- tried on some screws about same thickness of nails no good- you think they make bolt cutters like this be a great product

Heavy duty!

Excellent tool

Whoever hung the light fixture in my house was a monster. They used toggle bolts with heads larger than the keyholes. One was put in at a very steep angle. Both were mostly stripped. I was unable to back the fasteners out more than about an inch with a slotted screwdriver. I would happily have ripped the bolts out and just repaired the drywall, but I couldnt get a grip on them or the fixture to do that. I am short and not very strong or comfortable working above my head, especially with a powered saw. Normal bolt cutters are at the wrong angle. So after reading some reviews of these to make sure that they could handle a couple of 1/4 or smaller threaded fasteners, I ordered them. Id rather spend $60 on these than risk getting a head wound or hurting my hands or my eyes. Took less than 5 minutes to get the fixture down, most of which was me moving from one step stool to the other while a friend held the center. Knipex tools are expensive, but they are well made, well balanced, and a pleasure to use. UPDATE Oct 2020: I didnt have any flush cutters or any other cutters, and I was desperate. Because these cutters are not extremely sharp, they are quite handy for gripping and gently rolling 3-4 inch brads out of drywall so you dont get all scratched up. Handy to know if you have to remove trim to get to the edges of your sewage soaked carpet to pull it out it the middle of the night. As you do.

I chose these cutters for leather working because they have a compound action. This makes cutting brass rivets more manageable than with traditional cutters, the handles are offset to the side of the cutters and that also helps gaining access to cutting in some hard to reach areas .

I bought this to cut nails on the underside of my sub floor to allow for radiant heat tubing. these cut nails very cleanly with very little effort very close to the surface. little pricey but they work super nice so i would recommend.

Durable; allows me to cut bolts and screws easily.

Cuts protruding roofing nails in my eaves almost flush with surface. Perfect tool for this

when roofing my house a few of the sheet nails missed the studs. i bought these to cut the missed nails off and they did not disappoint. They cut almost completely flush to the surface and after cutting about 50 nails there is no noticeable deformation or damage to the blades.

The previous owners of my house used really long nails to put a roof on the covered porch and the ends stuck out at least an inch from the boards making the ceiling look like the inside of an Iron Maiden! This awesome tool allowed me to cut them off flush to the boards so you cant notice them. Im a 73 year old woman and had no trouble squeezing the handles. I love these cutters.