It does what it says its supposed to. Im weary of how the TV mounts to the bracket. The hooks barely hang over mount. There is a screw to keep the tv from slipping but I am a worrier. It does what it says it does though.

Love this mount. Easy to install due to the cardboard cutout. Love the fact that you can install it to 16” or 24” stud spacing big plus since the studs are not always where you plan to install the tv in the room so this made it easy for me to install. Smooth movement. I will definitely buy another one for my other room. Thank you for the hdmi cable included.

We just hung a 65 LG LED TV in our family room using this wall mount. Parts of it were a two person job and at the start it seemed a bit daunting, but the instructions were absolutely fantastic and very detailed making it difficult to make too many mistakes. It came with lots of different spacers, bolt sizes for the TV mounts, and so forth, so that you can experiment a little and come up with the best fit for your TV. We have blocking in our wall for a TV mount, so we didnt need to worry as much about finding studs, but you will want a good stud finder for mounting on a sheetrock wall. The mount is fairly easily adjustable, with left and right pivot, 3 degrees of rotation (achieved by slightly loosening the backing plate on the mount and shifting the TV slightly with a level on top - so it is not designed for frequent adjustment), and an angle tilt forward and side to side. You can also adjust the height by several inches by bolting the brackets higher or lower on the TV at initial install - we did this a couple of times to get it right. The end result is a solid, solid mount. It is well designed and we are super happy with it.

Really easy to put together. Happy with the outcome.

Purchased this mount to put my 55 samsung TV on the wall. Install was relatively easy enough and instructions were easy enough to follow. I ran into two problems 1. the design of my wall puts a stud dead center as to where I want to mount the TV. However the wall unit is only long enough to span two studs and not three, so you end up having to either cut into your wall and install spacers and then attach the wall mount, or you offset your base and then try and center the TV. Not exactly ideal, but it can work. The second problem I ran into is the way the brackets are designed the entire setup you attach the TV to on the wall mount blocks both the power cable AND any audio/LAN connections. Which prevents you from using the TV at all. While they provide you with 2 screw length options, they are either too long or too short to be of proper length. I finally gave up trying to jerry rig the entire system and I ended up having to return the mount.

Have had for several years. Still works like new. Installed into brick; was easy to install. I would suggest getting your own, heavier duty hardware for installing to the wall for a few more dollars.

It’s a sturdy product. Took me an afternoon to install but I was not rushing. Spent most of my time finding the center of stud to minimize the damage to the stud from the large lag screw. This kit comes with a lot of accessory alternative parts to fit a range of TVs, but no extra parts. The included HDMI cable looks pretty chintzy and the included 4”-ish level you can just throw out. I used a longer construction level. Instructions were fairly good, and the item was well packaged. Once I had the mount on the wall, it seems to perform pretty nice. No wobbles at all. You’ll need a drill with a right size bit. A good level, and preferably a good stud finder to locate stud edges, which you should verify with a series of small drill holes. The kit comes with instructions for a masonry or wood/metal stud wall. Overall, pretty happy with it. My one issue is that you need to unscrew two hex bolts to undo the safety that keeps the TV on the rails. A quick release type mechanism would have been better in my opinion.

They are great for new home with the interior wall with 24in studs

We have 16 on-center studs. Supposedly, this mount supports 16, 18, or 24; however, none of the holes in the template or mount seem well-designed for that. You might be able to get it to fit, if you go from far edge to far edge, but it should have been designed to have the holes centered to allow for variance in either direction. As it is, if you have holes 15 apart, this mount would fit, but if theyre 16.25 apart, it might not. There doesnt seem to be any method to hook the TV to the wall mount left/right of center. So unless your studs just happen to be center where you want the TV on the wall, it will be off center. :(

Suitable with cheaper price. Easy installation with sturdy product.