Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Armyguy8382
> 3 dayIts thermal paste so it is hard to get wrong. I dont have a lot of fancy tools to test it so see if it is any better than any other choices but it arrived quickly and nothing seemed wrong with it when I used it. The scrapper helped clean the old paste off my CPU but I still had to use cotton swabs and rubbing alcohol to get it completely clean.
-
Raphael theodore
> 3 dayOutstanding product
-
Rodger Reiswig
> 3 dayQuality paste and great for my CPU repair. The tube that holds the paste is well made also.
-
Sharon K Hornback
Greater than one weekThis is the best thermal paste I have used I have used this stuff for years
-
Chris D.
> 3 dayThis stuff worked out fine when my son upgraded his computer parts.
-
Jackson Notch
> 3 dayVery good
-
Adrian
> 3 dayEasy to spread, works perfect.
-
juan
> 3 dayBuena pasta llego antes de tiempo
-
MarceloW
Greater than one weekGood product but expensive. There are another products cheaper without the brand Artic Silver.
-
pinkhummingbird
> 3 daySaved lots of money putting it on my MacBook pro.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
