Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
D.Hard
> 3 dayMore than enough. And the spreading tool is great !
-
dan
> 3 dayBrought my average temps down by about 10 degrees
-
Jeremy martel
> 3 dayHave nothing to say about it
-
Lara S.
> 3 dayWorked as advertised. This is the 6 th computer I’ve built.
-
Dean
> 3 dayDid what it is supposed to do. The pictures are misleading about the size of the product. It is very small. Was enough to do what I had to do but definitely not the same size as in the pictures.
-
Denise C
> 3 dayNo comment
-
Seamus Gusikowski
> 3 daySuper easy to use. Put a pea size drop on the cpu and attached the AIO water cooler. Perfect temperatures.
-
Curtis Lawton
> 3 dayUsed this product to replace the thermal paste on my Xbox One Xs CPU underneath the cooling system after I had my Xbox shut down due to ventilation errors every 5 minutes, after removing the old factory paste and applying this, I have not had a single issue since.
-
gary w fann
> 3 dayfixed my ps4 pro jet engine. Was worth the risk of taking apart the pro and reapplying there crappy stock thermal paste
-
Pho
> 3 daysee headline.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
