Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Treva Daugherty
> 3 dayGreat product
-
Garrett Fuller
> 3 dayHonestly the little spreading knife is the bees knees. I have always used the nose of the tube to smear, but now I can never go back to that nonsense. The paste works great, my processor is rubbing nice and cool.
-
Mr. Paul J. Teviotdale
Greater than one weekI honestly don’t know what I bought but my friend who understands all this says it what I needed so I can’t really write a review other then to say it (in his words) the correct one you don’t need much
-
@Fyre
> 3 dayDoes what it says on the tin
-
Jeremy martel
Greater than one weekHave nothing to say about it
-
mike
> 3 dayThermal paste for your CPU
-
Russell A. Fry
> 3 dayWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
-
Xial
> 3 dayIts a really thick, sticky thermal paste, a bit different from what Im used to using. That said, Im getting good temperatures from the stock cooler sitting on my processor at the moment using this.
-
sam
> 3 dayWorks great and shipped very fast. I’d use this again. Pretty inexpensive.
-
Robert C.
> 3 dayworks great. Arctic silver is what I usually use when installing cpus. One tube is usually enough for two installs.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
