Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Richard J. Ehart
Greater than one weekFor me this is my go to paste. It is easy to spread great cooling ability and inexpensive. Used for years and very happy with product.
-
alex
> 3 dayVery good inexpensive , really good product .
-
Matt
> 3 dayIts thermal paste, it sticks well and helps in keeping my CPU cool.
-
steven
> 3 dayWorks great!!
-
Al Rose
17-11-2024works=ed as avertized
-
N. McArthur
> 3 dayExcellent product.
-
Nohkan
> 3 dayI have been using Artic silver for years and it has never let me down.
-
Wa
Greater than one weekWas upgrading CPU on older desktop. All went smooth except those Intel push pins. One broke when I was installing the cooler back on. No problem, didnt even have to reapply paste. Replaced the push pin and finished the cooler install. Temps are excellent on QX6700 Quad Core.
-
ibrahim
> 3 dayEasy to apply , works really good for GPU and CPU
-
John W. M.
> 3 dayIve use it before, works better than the white stuff.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
