Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
dray helms
> 3 dayGood
-
christina
> 3 dayEasy to spread, as described.
-
Gina
> 3 dayMy crappy Alienware laptop averaged 65C average idle operating temperature before I added this, now it averages 35C. I can finally browse Google without crashing and almost melting my CPU!
-
Paul D. Lawson
> 3 dayWorked very well. No problems using this product.
-
Christopher
> 3 dayBrought down temps quite a bit on my 3700x. its a bit thicker than other thermal pastes ive used so definitely use the spreading tool and dont be afraid to ice the cake just a tad
-
Robert C.
> 3 dayworks great. Arctic silver is what I usually use when installing cpus. One tube is usually enough for two installs.
-
Jose Romero
> 3 dayLo única observación es que viene como a granel, esto es, sin un empaque o blíster, me imagino es lo que la hace de buen precio, a diferencia de la MX-4 viene en su blíster; sin embargo, a mi me ha dado mejores resultados la artic silver 5.
-
Samuel
> 3 dayExelente producto
-
Amber Stokes
> 3 dayA thick paste which I had to spread thin with the little plastic spreader tool. No lumps or chunks in it.
-
Andy McClain
> 3 dayWorks absolutely fine. I had absolutely no problems adopting this to my original Xbox
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
