Noctua NF-A20 PWM chromax.Black.swap, Premium Quiet Fan, 4-Pin (200x30mm, Black)
-
Carol
> 3 dayExactly what I needed for my audio video receiver.
-
Jason Belyew
> 3 dayAs they state in the description.... Please Note: The NF-A20 has a 200mm diameter (7.8 inches), and a thickness of 30mm (1.18 inches). Please make sure you have sufficient space in your case.
-
Poolboy16
Greater than one weekAs most case fan, 3d printer, pc builders, ect... enthusiast know, Noctua makes absolutely incredible fans. I can confirm that, they do in fact make INCREDIBLE fans.
-
Mr. Mod
> 3 daySturdy structure, quality parts, and quiet operation.
-
Cho JunKyoung
> 3 daygood !!!
-
AR Family
> 3 dayWell, I had been holding off ordering this fan mostly because the rest of my case uses the REDUX gray Noctua fans and I was hoping Noctua would release a 200mm REDUX. I waited nearly two years and then finally my very old 200mm XIGMATEK case fan started to slow down so I had no choice. I installed this fan a couple days ago and I must say I was expecting a great fan, but this exceeded my expectations dramatically. It is so solidly built compared to the XIGMATEK; the Noctua must weigh 3x more at least. Also, the motor is very large, and the bearing has zero play. The fan blades themselves are thick and sturdy. This is Noctua at its finest.
-
Sean Eliab
> 3 dayFor my 1st custom build (of which there are more to come), going big on Noctua was the right decision.
-
cdeath
> 3 dayOrdered this fan to replace the 200mm front panel fans on my lian li 215 case. They would fit if they came with 35mm screws, however Noctua felt that was not necessary. All standard long fan screws are 30mm, this fan is 30mm thick. Its really cheap to not include 20 cents worth of screws with a $36 fan, very disappointed with Noctua right now. Best I can tell a M3x35mm screw is what you need, guess I am going to home depot to find screws now.
-
Coraje
> 3 dayGreat fans. One of the best or if not the best. Cooled my PC great and quietly.
-
Stacie E.
> 3 dayReplaced my TT 200MM case fans and bought these to match the other noctua products. Its quiet at max rpm of 800 and you can feel that it is pulling/pushing a lot of air through.
Having received dozens of awards and recommendations from international hardware websites and magazines, the NF-A20 has established itself as a default choice when it comes to premium-quality 200mm fans. The chromax.black.swap edition combines the NF-A20’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables and anti-vibration mounts are available separately. Topped off with Noctua’s trusted premium-grade SSO2 bearing and more than 150,000 hours MTTF, the NF-A20 PWM chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance.
Award-winning Noctua quality in 20cm size
While more and more PC cases support 20cm intake, side-panel or exhaust fans, many of the bundled stock units and available aftermarket options are of questionable quality. By contrast, the NF-A20 is a true premium grade solution worthy of Noctua’s award-winning A-series.
Please Note: The NF-A20 has a 200mm diameter (7.8 inches), and a thickness of 30mm (1.18 inches). Please make sure you have sufficient space in your case.
|
|
|
|
|
|---|---|---|---|
Swappable anti-vibration pads in 6 coloursWhile more and more PC cases support 20cm intake, side-panel or exhaust fans, many of the bundled stock units and available aftermarket options are of questionable quality. By contrast, the NF-A20 is a true premium grade solution worthy of Noctua’s award-winning A-series. |
SSO2 bearingThe NF-A20 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
154mm, 110x180mm and 170mm hole spacingIn order to ensure broad compatibility with today’s PC cases, the NF-A20 features three sets of mounting holes: While the 154x154mm and 110x180mm spacing allow it to replace most 200mm fans, the 170x170mm spacing is used by many 230 and 250mm fans, which can thus also be replaced by the NF-A20. |
Optional coloured cablesNoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black NA-EC1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm NA-EC1 cables plus corresponding NA-YC1 y-cables are available separately. |
Maximising colour choices, Noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NF-A20 PWM | NF-A20 FLX | NF-A20 5V PWM | NF-A20 5V | NF-A20 PWM chromax.black.swap | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin | 4-pin PWM |
| Voltage | 12V | 12V | 5V | 5V | 12V |
| RPM | Max: 800 / Min: 350 | 800 | Max: 800 / Min: 350 | 800 | Max: 800 / Min: 350 |
| RPM with L.N.A. | 550 | 550 | - | - | - |
| Acoustical Noise | 18,1 dB(A) | 18,1 dB(A) | 18,1 dB(A) | 18,1 dB(A) | 18,1 dB(A) |
| Acoustical Noise with L.N.A. | 10,7 dB(A) | 10,7 dB(A) | - | - | - |
| Size | 200x200x30 mm | 200x200x30 mm | 200x200x30 mm | 200x200x30 mm | 200x200x30 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige | Black with swappable coloured anti-vibration pads |