Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
Matt
> 24 hourA great little fan that moves plenty of air and makes very little noise. Would prefer an option to purchase it without the huge box and unwanted extra cables/connectors and adaptors but I guess you cant have everything!
-
benoit
> 24 hourproduit un peu cher, mais mérité, la qualité est au rendez-vous, pas de bruit, rien à dire!
-
PDW
> 24 hourWanted a cheap, quiet fan to replace an old one that was getting noisier everyday. This did the job perfectly and has remained quiet several months later.
-
Bailey Harper
> 24 hourIt is a good upgrade for your fan on your 3D printers. But in my experience, it was a little difficult to install, and the wires were too long. I had to cut and melt my wires. But other than that, it was a good fan! worked so much better than the built-in fan.
-
Mr Luc LEFLON
> 24 hourVentilateur pris pour remplacer sur une Ender 3 Pro
-
John Snell
> 24 hourI bought this to use for cooling on the extruder of my 3d printer (Monoprice Maker Select v2). Have been using now for several months (well over 200 hours of use) with no issues at all. Nice and quiet!
-
Richard
> 24 hourDoes the job well. Quiet enough for me (nearly silent). Good buy.
-
Kaveer
> 24 hourInstalled in an anycubic i3 mega pro
-
Michael Lopez
> 24 hourI installed this fan underneath the PSU shroud in my case for a little extra cooling for my gpu. I didnt expect a big difference in temps but I thought it wouldnt hurt. Its maybe a 1-2° difference. I had a hard time installing it but only because my power supply is big and I had limited space. If you have a NZXT H210 and plan on doing something like this, Id recommend getting an SFX power supply.
-
Hans
> 24 hourLeider habe ich damit Probleme PLA mit dem e3d v6 zu drucken (angebracht per gedrucktem Adapter). Das cold end wird viel zu heiß, sodass das PLA kleben bleibt, also verstopft. Mit dem (sehr lauten) Originallüfter des Hotends funktioniert PLA gut.
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth Commutation Drivetechnology and Noctua’s reference class SSO2 bearings ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and a Low-Noise Adaptor and OmniJoin Adaptor Set, the NF-A4x10 is a premium choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 BearingThe NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. |
Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.
|
|
|
|
|
|---|---|---|---|---|
| NF-A4x10 PWM | NF-A4x10 FLX | NF-A4x10 5V PWM | NF-A4x10 5V | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin |
| Voltage | 12 V | 12 V | 5V | 5V |
| RPM | Max: 5000 / Min: 1000 | 4500 | Max: 5000 / Min: 1000 | 4500 |
| RPM with L.N.A. | 3700 | 3700 | - | - |
| Acoustical Noise | 19,6 dB(A) | 17,9 dB(A) | 19,6 dB(A) | 17,9 dB(A) |
| Acoustical Noise with L.N.A. | 12,9 dB(A) | 12,9 dB(A) | - | - |
| Size | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige |
