Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
Didiz
> 3 dayPris pour réduire les nuisances sonores de mon imprimante (Creality Ender 3 PRO), fait très bien le travail.
-
Roselyne Bailly
> 3 daypour remplacement dans un lecteur vidéo Mede8er type Med500x2 avec DD interne: ventilo dorigine qui commençait à siffler (pour info cest un Doceng FD124010 SS ZP et qui coute entre 10 et 20€ nue + le transport)
-
TS
> 3 day3Dプリンタ（i3 mega）のステッピングモータードライバとホットエンドを冷却するファンがうるさいので、静音化のために購入しました。あまりにも静かなので本当に回ってるのかと疑ってしまいました。
-
Richard Strauss
> 3 dayI ordered two, one for a POI switch and one as a spare. The fan was nicely packaged and included a complete Installation kit including adapters for different connectors. The problem is that after a short time it stopped and would only run if given starting assistance. The second fan behaves the same - very disappointing!
-
ManiacMagic
> 3 dayit does what it is supposed to do .... not a ton of air movement ... but its quiet and moves air.
-
Roberto
> 3 dayHabe diesen Lüfter als ersatz für die Originalen viel zu Lauten lüfter von meinem Anycubic Chiron gekauft, nach dem Umbau ist dieser Flüster leise. Perfekte Lüfter
-
Francisco
16-11-2024No suena apenas nada lo utilizo para mi impresora 3D
-
Toby
> 3 dayInaudible when inside the case along with other fans. Extremely well built. Perfect fit for an LSI SAS card if you are using it in a tower with no airflow over the sas heatsink (you can mount it with 2x3mm bolts).
-
Gigaloaf
> 3 dayNoctua always makes a quality fan, and this little guy is no different. Even running full blast at 4500 RPM without the low-noise adapter, it really doesnt put out much noise at all, and the build quality and included accessories are solid as usual for the manufacturer. I attached this to the heatsink of a RAID controller card that tends to have problems with heat, and it keeps it within a much more comfortable temperature range. Good stuff!
-
MINOIR
21-11-2024Hi8ビデオデッキ冷却ファン交換の為、購入しました。
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth Commutation Drivetechnology and Noctua’s reference class SSO2 bearings ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and a Low-Noise Adaptor and OmniJoin Adaptor Set, the NF-A4x10 is a premium choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 BearingThe NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. |
Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.
|
|
|
|
|
|---|---|---|---|---|
| NF-A4x10 PWM | NF-A4x10 FLX | NF-A4x10 5V PWM | NF-A4x10 5V | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin |
| Voltage | 12 V | 12 V | 5V | 5V |
| RPM | Max: 5000 / Min: 1000 | 4500 | Max: 5000 / Min: 1000 | 4500 |
| RPM with L.N.A. | 3700 | 3700 | - | - |
| Acoustical Noise | 19,6 dB(A) | 17,9 dB(A) | 19,6 dB(A) | 17,9 dB(A) |
| Acoustical Noise with L.N.A. | 12,9 dB(A) | 12,9 dB(A) | - | - |
| Size | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige |
