Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
フランシス
17-11-2024Works great in a SFF case.
-
Eric
> 3 dayI built a system around this (and the case), aiming for a quiet PC and got exactly that. I followed the directions exactly. It is not only quiet, but effective. I didnt test the stock cooler for my Ryzen 5600x cpu, but even lacking that comparison, I can say this exceeded expectations. I would buy again.
-
dHermit
> 3 dayNot easy to install when the motherboard (X99) is already populated. Lack options to install a slim (15mm) width fans. Cooling performance is ordinary.
-
Anthony West
Greater than one weekUsed this for an Intel i7-12700K. Works well to keep the CPU cool, even under intense gaming, or running several virtual machines, video processing, etc.
-
CleverFam
> 3 dayThis is a great cooler if youre hoping to get some airflow on the motherboard around the cpu. Its also very quiet.
-
John Daigle
> 3 dayAfter much research and vacillation between water vs air cooling, I went with the noctua. My Skylake 4ghz clocks to 4.7ghz with this--with water maybe I could get a little more but it doesnt matter to me; I mostly run it at under 4.5 anyway. The fan is dead silent and mounting the fan on top, as shown here, allows my low profile memory not only to fit under it but to be inserted or removed (ATX case). I also like the orientation of the radiator. Why? Physics--the farther out the mass from the point of attachment, the more leverage on the motherboard; this orientation with the radiator parallel to the motherboard keeps the mass close minimizing the leverage--the fan also blows right down onto the memory.
-
G.E.
> 3 dayFirst Noctua cooler and very easy to install. One recommendation would be to verify if there are any compatibility with motherboard, case and ram. During the installation in Fractal Design Torrent Nano, needed to rotate the cooler 180 degrees BUT cannot install an exhaust fan in the case due to the size of the cooler.
-
iwalkwithedead
> 3 dayLove it!
-
M Remo
> 3 dayIt fits like a glove when you need a low profile, premium air cooled heatsink. This fit just barely in my Corsair Air Carbide 240 MATX cube case and on a Gigabyte GA-Z170MX-Gaming 5 MATX mobo. I had to mount the fan on the bottom side to meet the clearance of the case, but if you have more space, you could add a second fan so that there are dual fans in push-pull config. I have it cooling an I5 6600K which is currently OCd and with Prime 95 running, Im still under 60C.
-
Calacien
> 3 dayFirst off, let me say, this cooler is large. Super large.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
