Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)

(390 Reviews)

Price
$47.97

Quantity
(10000 available )

Total Price
Share
186 Ratings
151
21
5
5
4
Reviews
  • John Daigle

    > 3 day

    After much research and vacillation between water vs air cooling, I went with the noctua. My Skylake 4ghz clocks to 4.7ghz with this--with water maybe I could get a little more but it doesnt matter to me; I mostly run it at under 4.5 anyway. The fan is dead silent and mounting the fan on top, as shown here, allows my low profile memory not only to fit under it but to be inserted or removed (ATX case). I also like the orientation of the radiator. Why? Physics--the farther out the mass from the point of attachment, the more leverage on the motherboard; this orientation with the radiator parallel to the motherboard keeps the mass close minimizing the leverage--the fan also blows right down onto the memory.

  • Zaxon

    > 3 day

    I purchased this cooler because I had an awkward computer set up. Firstly, the case is too thin for full-sized tower coolers. And secondly, I have high profile memory. This made it almost impossible to find an air cooler that would work in my rig. But the NH-C14S was the answer.

  • Superfuzz

    Greater than one week

    Much bigger than I was expecting but it seems to work well. Nearly silent with the fans running <50% (I have an extra 140mm fan so I am running with the dual fan configuration). Generates a small amount of noise with the fans at 100%.

  • Julio

    Greater than one week

    Im replacing the stock cooler. Its great! so quiet! temps went from 85 to 50.

  • > 3 day

    I am using this on a 2700X CPU and a Tomahawk B450 Board and right now it is running at 105 degrees F ... It is quiet but then again I am not a gamer but it seems to do the job ... even when my CPU is maxed out I have only seen the temp. in the 120 Degree area, wish I could say the same for my GPU ... but it is a older one, to be replaced soon... If you have a M/ATX case it wont fit, I can tell you from experience ... one way it gets interfered with by the Blue Ray Drive and the other way by the rear fan... it is a big unit ... I see people complain about the colors of the fan, if that is the case order a 140MM that you like but I really like a quietness and I have maxed it out.... You can mount the fan on the top or on the bottom and yes it clears the memory .... Hope this helps guide your decisions ... I am really beginning to think on these reviews that some people just like to downgrade everything ... I am happy with everything in my system

  • luke e.

    02-06-2025

    So Ive had this cooler for a few months now and absolutely no complaints, it tames my ryzen 7 5800x no problem. I have the fan in low profile mode with the fan blowing towards the socket. Ive done multiple tests where Ive had the fan blowing away from the socket and I saw that it will run 5-7 degrees hotter. Definitely recommend for a semi low profile build with a reasonably hot CPU. Installing this was a breeze with the secufirm mounting system, not sure about Intel since AMD is clearly Superior but Im sure its just as easy.

  • Katrine Hilpert

    > 3 day

    CPU:Ryzen 9 5900X

  • Keith Pelletier

    > 3 day

    cooler très silencieux et efficace, possibilité de rajouter une autre fan..un peu volumineux par contre donc faire attention si vous avez beaucoup de RAM ou une grosse carte graphique

  • Just a guy

    > 3 day

    Bought this to fit a Silverstone gd09 case for a htpc, just fits and everything works perfectly and is quiet. Highly recommended although its a bit pricey and a little tricky to install

  • Joe Maliszewski

    > 3 day

    Just installed my NH-C14S. Relevant specs on my rig:

NH-C14S HeaderNH-C14S Header

Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.

NH-C14S Low-profileNH-C14S Low-profile

NH-C14S High ClearanceNH-C14S High Clearance

NF-A14NF-A14

a14a14

Low Profile Mode

Run with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases.

High Clearance Mode

Run with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height.

NF-A14 140mm premium fan

Featuring sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14.

NT-H1 thermal compound

Noctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.

c14c14

C-Type top-flow design

The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.

NH-C14SNH-C14S
Measurements
  • Height (without fan): 115 mm
  • Width (without fan): 140 mm
  • Depth (without fan): 163 mm
  • Height (with fan): 115/142 mm
  • Width (with fan): 140 mm
  • Depth (with fan): 163 mm
  • Weight (without fan): 820 g
  • Weight (with fan/s): 1015 g
Material

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 1x NF-A14 PWM premium fan
  • Low-Noise Adaptor (L.N.A.)
  • Fan clips for second fan
  • NT-H1 high-grade thermal compound
  • SecuFirm2 Mounting Kit
  • Noctua Metal Case-Badge
Socket compatibility

Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5

Related products

Shop
( 2203 Reviews )
Top Selling Products