Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Massimo
Greater than one weekUn Po di difficoltà nellassemblaggio, ma si vede subito dal pacco che è di primo livello. Ventole senza rumore e qualità super. E veramente grosso.
-
Jacob P.
> 3 dayVery quite and keeps my temps low on my i9 9900k
-
Chong Vang
> 3 dayIt’s a good fan. Just too big for my case so I only had one fan installed and the other fan is sitting in the box that came with it. Get a bigger pc case if you want room to fit the whole thing.
-
John Thompson
> 3 dayEasy to install and does a great job.
-
S. Li
> 3 dayThis block keeps my 2600k at 29c idle and hardly go over 50c while gaming. I was skeptical about air cool at first coming from a h60. It worked great and exceeded my expectations. The only thing to complain is the design and does not look clean as AIO. Highly recommended if you are willing to sacrifice the interior abit. I can always put some leds around it to make it look abit nicer i guess.
-
Jim
> 3 dayI installed this in a NZXT Source 530 Case with an Asus Z97A Mother Board running a I7-4790K processor. I also have very tall ram. It clears the ram just fine however I did need to slide the rear fan up on the heat sink because of the ram. There is plenty of clearance for the first Pci slot and I am running a Asus GTX1070 Dual with no problems. I over clocked the processor to 4.6 and the cooler has no problem cooling with CPU temps in the 50s under load. It is a big cooler so be sure it will fit your build. If you have questions the folks at Noctua will gladly assist you. The install was super easy as well. Top quality and very quiet!
-
Craigo
> 3 dayThis is a fabulous cooler
-
azazel
Greater than one weekCabe muy justo y no he podido ponerle los dos ventiladores que trae.
-
daniele
> 3 dayCompratelo ad occhi chiusi dopo aver controllato le dimensioni del case, è in assoluto il miglior dissipatore ad aria sul mercato e decisamente più silenzioso (con prestazioni uguali se non superiori) degli aio in commercio
-
Lucio Ancora
> 3 dayOttimo dissipatore, lo uso ormai da sei mesi e non ho alcun problema. Con un overclock del mio i7 4770k a 4.3ghz si comporta egregiamente, infatti anche con il caldo di questa estate non sto avendo nessun problema è le temperature rimangono molto buone.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
