Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
-
W. Ng
> 3 dayI bought this to replace the regular one that came with my Ender 3 Pro and this is a much superior product. Its basically a spring steel sheet with the PEI coating over it. It also comes with a magnetic layer with 3M adhesive backing. I did not have to use that magnetic layer because the Ender 3 Pro already had a magnetic layer stuck on the bed. With my prints, the first layer in contact with this new sheet is super smooth and I have not have problems with adhesion. When the print is done the removal process is super easy as well. I can remove the skirt with my finger nails and it comes right off and the print itself is basically lifting up the sheet a little and flexing it a little. The print pops right off. Ive printed just 3 prints so far. Lets see how long this last bust so far I am very happy with the purchase.
-
Rob P.
> 3 dayFits my Ender 3 Pro like a glove, prints adhere really well, and pop off easily.
-
Big Daddy Chad
Greater than one weekI had the first print adhere to it but nothing has since. I have tried cleaning it with 99% and even used dawn dish soap. I cannot get anything to stick.
-
Jason
02-06-2025Best upgrade over the glass bed on my ender 3 v2. Everything just sticks first time, no more glue sticks, no more chiseling things off the glass bed.
-
Bren Marshall
> 3 dayIt works so well with PETG
-
Chris Strickland
> 3 dayGetting product off is a breeze.
-
Maria Eckley
> 3 dayWorks as good as described
-
Mark Lafferty
> 3 dayIve had my Ender3 for about 2 years and have printed miles of filament. I had been using a glass print bed but decided to try the PEI bed. The prints would sometimes not stick to the glass or not come off once completed. This works very nicely, great initial adhesion and the flexibility allows the print to pop off without issue. Additionally you dont need the binder clips to hold the build plate down as the PEI is magnetic which gives you a more complete build surface to use. Love it!
-
levi madar
> 3 dayThis bed is so much better for my S1 printer than the bed it came with. The prints sticks really well but pops of easily. The only problem I have is you have to lay the bed past the screws at the back of the printer bed or else it wont fit.
-
Jamie Shirley
> 3 dayWAIST OF MONEY. PETG OR PLA WILL NOT STICK.
100% Official Creality PEI Removable Magnetic Flexible Heated Bed Platform is mainly divided into 3 layers:
- The first layer is made of PEI material. Smooth surface, good adhesion to various printing materials, especially PLA and ABS, high-temperature resistance.
- The second layer is a flexible steel plate, which is specially used to make springs and flexible elements, has strong deformability.
- The third layer is the magnetic base，which is made of soft magnetic rubber, soft in texture and has good magnetism and temperate, bure resistance. With 3M adhesive, it can be directly attached to the heated bed platform.
NOTE！
- 1.Please remove the transparent protective film on the surface before use!
- 2.Level the bed and set the height of the nozzle before printing!
- 3.Please use the recommended/usual nozzle and hotbed temperature for printing. If it cannot adhere, please try to change 2 or 3 degrees.
- 4.The PEI sheet can bear the maximum temperature of the nozzle at 200°C, and the hotbed at 70°C.
- 5.The color may exist a slight difference due to different screen displays.
|
|
|
|
|---|---|---|
Strong magnetic fieldUsing 3M adhesive to attach the soft magnetic sticker to the hotbed will no damage to the magnetic field under 130°C. |
No deformation at 200°CGenuine PEI powder coating is of heat resistance. Hardened steel spring plated is resistant to 200°C and no deformation. |
Handle designThe new design adds a handle to the steel plate, which makes it easier and faster to take out the steel plate. And outside the heated bed, it will not burn your hands. |
|
|
|
|
|---|---|---|
Quickly RemoveNo need for tape, glue, and shovel which release your printing anxiety. Easy to remove the prints just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. |
Smooth BottomThe PEI printing plate surface is smooth that will not leave any marks on the bottom of the prints. There is a good combination of hot-melt material and the printing layer, which reduces the deformation caused by shrinkage and avoids warping. |
Easy to cleanPlease clean the dust with a soft cloth. Wipe the stains with Low concentration alcohol gently. Do NOT wash or clean the PEI surface with any strong chemical reagents, or strong detergents. |
