Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
-
Shawn
> 3 dayGreat adhesion.
-
Michael Jones
> 3 dayWorks perfectly with all filaments. Makes removal of a print so much easier. I wish Creality would make the flex PEI beds standard on all their upper model printers. It improves the experience so, so much!
-
Marcelo T.
> 3 dayits as good as you can get for a build plate
-
Nathan
> 3 dayRan into some leveling issues after a few days of printing, and after hours of bed leveling I decided to switch back to my older glass bed. The magnetic pad left a thick layer of residue on the bed which required a few hours of rubbing and ALOT of acetone.
-
JS
> 3 dayThis is the second (one for my other printer) of these that I purchased. My preferred print surface. Makes removing prints easy.
-
Wes C.
> 3 dayThis drastically improved first layer adhesion on my Ender 3 V2 compared to the stock glass bed. I had tried adding a CR-Touch, replacing the springs, fiddling with temperatures and slicer settings, and using both sides of the stock glass bed, but I could rarely get reliable prints especially for small details on the first layer of many prints. With the PEI plate the filament perfectly forms on the bed from the extruder and doesnt curl or get elephants foot when I use standard 200C extruder and 50C bed temperatures with Overture PLA. Well see how long the adhesive lasts, but so far this is easily the best upgrade Ive made to my printer short of the CR-Touch. Plus you get the added bonus of no longer needing to use the scraper to get (most) things off the bed!
-
Pastor
> 3 daybetter than standard mat came with use 91% alcohol regularly to clean
-
kendall
> 3 dayBought in June in July the top layer has began bubbling up. Worked great up until then. Definitely wouldn’t spend the premium price for this bed surface again.
-
Luis Alejandro Soto
> 3 dayBuena calidad
-
Michael Hite
> 3 dayThis is a great upgrade, almost a must for the standard Ender 3. The PEI build plate releases the part as soon as it’s cooled off. No prying at it with the spatula like on the stock build plate.
100% Official Creality PEI Removable Magnetic Flexible Heated Bed Platform is mainly divided into 3 layers:
- The first layer is made of PEI material. Smooth surface, good adhesion to various printing materials, especially PLA and ABS, high-temperature resistance.
- The second layer is a flexible steel plate, which is specially used to make springs and flexible elements, has strong deformability.
- The third layer is the magnetic base，which is made of soft magnetic rubber, soft in texture and has good magnetism and temperate, bure resistance. With 3M adhesive, it can be directly attached to the heated bed platform.
NOTE！
- 1.Please remove the transparent protective film on the surface before use!
- 2.Level the bed and set the height of the nozzle before printing!
- 3.Please use the recommended/usual nozzle and hotbed temperature for printing. If it cannot adhere, please try to change 2 or 3 degrees.
- 4.The PEI sheet can bear the maximum temperature of the nozzle at 200°C, and the hotbed at 70°C.
- 5.The color may exist a slight difference due to different screen displays.
|
|
|
|
|---|---|---|
Strong magnetic fieldUsing 3M adhesive to attach the soft magnetic sticker to the hotbed will no damage to the magnetic field under 130°C. |
No deformation at 200°CGenuine PEI powder coating is of heat resistance. Hardened steel spring plated is resistant to 200°C and no deformation. |
Handle designThe new design adds a handle to the steel plate, which makes it easier and faster to take out the steel plate. And outside the heated bed, it will not burn your hands. |
|
|
|
|
|---|---|---|
Quickly RemoveNo need for tape, glue, and shovel which release your printing anxiety. Easy to remove the prints just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. |
Smooth BottomThe PEI printing plate surface is smooth that will not leave any marks on the bottom of the prints. There is a good combination of hot-melt material and the printing layer, which reduces the deformation caused by shrinkage and avoids warping. |
Easy to cleanPlease clean the dust with a soft cloth. Wipe the stains with Low concentration alcohol gently. Do NOT wash or clean the PEI surface with any strong chemical reagents, or strong detergents. |
