OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Pewponmuhbutt
> 24 hourWicked easy install. Even came with screws.
-
steve o
> 24 hourQuality aluminum bracket on par with original apple drive sleds for 3.5 fit SSD right into old drive slot. of course a 500mb/sec SSD will only get 300mb/sec in the built in slots, but good enough for some purposes where max speed isnt critical.
-
Michael Vilain
> 24 hourwell made and a true attach drive and slide it in. Apples carrier had issues, which is why I replaced it.
-
Jimi
> 24 hourFit like a charm
-
WW
> 24 hourAlles bestens, genau das was ich gesucht habe. Mittlerweile 4 stk, da unglaublich praktisch.
-
Schmidel McGrödel, Esq.
> 24 hourThis is the best tray for 2.5 drives in a Mac Pro, but consider NVMe SSD for more speed instead.
-
Wes Miller
> 24 hourworks as expected cool its anodized.
-
D. W. Francis
> 24 hourThe only potential drawback is the color. In all other respects; fit, finish and functionality, it’s very well done.
-
briman
> 24 hourInstalled 2 samsung Sata SSD into my old 2102 Mac Pro tower and instead of letting them hang there I bought these and worked perfect.
-
joe nork
> 24 hourusing with 3 macpro 5.1s and protools, digi, avid etc. works great.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
