OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Bob Dempsey
> 3 dayI have used these for a 2.5” SSD and a 2.5” hard drive. I have one in each of my early-2009 and mid-2010 Mac Pro computers. Exceptional build quality and perfect fit.
-
Stuart T
> 3 dayGreat solution to my taped to the frame loose hanging SSD as purchased from previous owner. Blue color is neat, reminds me of R2D2 having alternate color panels.
-
steve o
> 3 dayQuality aluminum bracket on par with original apple drive sleds for 3.5 fit SSD right into old drive slot. of course a 500mb/sec SSD will only get 300mb/sec in the built in slots, but good enough for some purposes where max speed isnt critical.
-
Jimmie Hessel III
> 3 daya baby can install it!!
-
Johnathan Ilac
> 3 dayWorks perfectly as intended. No issues with installation.
-
James Y
> 3 dayOver priced for what it is, but it works fine for my 2010 Mac Pro.
-
RedStar
> 3 dayJust what my Mac needed
-
Test4echo3
> 3 dayWorks as advertised!
-
jrh_xyzzy
Greater than one weekThis sled is the perfect size. Made it a breeze to replace the stupid spinner in my Mac with an SSD.
-
D. W. Francis
> 3 dayThe only potential drawback is the color. In all other respects; fit, finish and functionality, it’s very well done.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
