REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8-2-1/8”).
-
Jason
> 24 hourEven if you use oil these scream on a low revolution drill press. they dont seem to bit into the metal very small shavings/chips. The kit itself is nice, spring loaded to push the metal plug out. They work just takes some time.
-
Sarah
> 24 hourGreat value and quality - would definitely purchase
-
Russell Zimmerman
> 24 hourLike them for drilling big holes quickly in mild steel up to 1 inch thick
-
This product is just as expected great quality perfect fitment comfortable at an affordable price
> 24 hourThis item has proved to be used for many occasions when needing to make a hole for anything all the teeth on the circular saw does not appear to be sharpened enough to immediately pierce through metal eventually, after some time I was able to break through the metal needed access to still for the price I would recommend to anyone
-
Carlos Flood
> 24 hourCalidad en el corte y funcional
-
Gypsy
> 24 hourWorks well
-
Nick
> 24 hourThis product made it 3 holes before failure. All teeth are destroyed. I know these are vheep but they are trash. Hols look like they were cut with normal holesaw. Do not waste time or money on these.
-
Anita Stockwell
> 24 hourI am very impressed with these are you someone several projects way better than a hole saw
-
Eliseo Ramirez
> 24 hourWorks great sharp and cuts good through stainless steel 16 gauge up to 3/16 that I used them on. Wish they would co e in a sturdy case. Only individual case.
-
Blue Yammer
> 24 hourThe cutters have worked adequately for the hobbyist projects, but be careful to use the right RPM, pressure and some sort of cutting oil to keep the teeth from overheating. The only complaint is that its hard to tell if the teeth are the same depth or there is a lot of runout relative to the shaft.
TCT Hole Saw Kit
- It can be held by hand drill and bench drill.
- Made of carbide alloy steel material,excellent performance.
- Sharp edge, wear-resistant,good drilling capacity.
- Used for steel plates,cast iron,stainless steel,other open metal hole.
The best effect: steel plate within 3mm and iron plate within 10mm.
Steel and iron plates can be drilled up to 20mm thick, but please pay attention to the operation.
Wide range of application
|
|
|
|
|
|---|---|---|---|---|
| 9PCS Dry Vacuum Brazed Diamond Drill Bit Kit | 7PCS Masonry Drill Bit Set | 10PCS Concrete Hole Saw Kit | 17 PCS Rotary Hammer Drill Bits & Chisels Set | |
| Number | 9PCS | 7PCS | 10PCS | 17PCS |
| Application | For porcelain, glass, marble, ceramic, rock and granite etc. | Ideal for drilling through red brick, glass, concrete, ceramic tile, plastics, wood and More. | Prefect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner. | working on concrete, masonry, wall, bricks, stone and road. |