Rinbers® BLACK LCD Screen Display Touch Panel Glass Digitizer Assembly with Frame Combo Replacement for Playstation PS Vita PSV PCH-1001 PCH-1101

First off - this is a legit (from what I can tell) PSVita screen. Its an OLED and has the logos on the system. They cover the logos with black tape in the pictures. When you order - dont expect for the first one to be perfect. After reading most of the reviews I had that realization and mine was no different. The first one had small featherlike cracks in the top left of the screen. I was able to get a replacement without any question and the second one that came in was perfect. It looks brand new and there isnt a single issue with the screen. The first thing I noticed is that the outside gray edges are actually painted gray versus having that silvery look of the original. That didnt bother me so I installed it. Another thing I noticed while assembling it is that the screw holes are hard to get going sometimes. I had to give a decent amount of force to get them to screw in, but I was able to in the end. Everything lined up without issue. Just follow the dissasembly guide on iFixit and youll be good. After assembly it turned on without any issue and looks brand new. Im hoping to find a back replacement soon.

Haven’t had a chance to install yet but the screen came with a crack on right up top left corner.

Excelente, y rápido.

Was mid way in assembling it and notice the right trigger slot is broken

If you are like me and fixing a PSVita for a customer, DO NOT buy this part. Best I can say is that this screen works. It came in bubble wrap ONLY. All the the plastic pins that hold in the boards were completely broken. The lens is not even fully adhesed to the plastic frame and is constantly raising up. EXTREMELY poor quality and it will absolutely fall out once any dust settles in there over time. Also this replacement is 100% not an OLED screen. Its an LCD. Go with a different seller.

I bought two of these based on other hit or miss reviews. First, these ARE 100% OLED SCREENS - at least my two were. Also the finish on both the face and sides looks perfect to me, same glossiness, same reflectiveness, etc. The logos are spot on as well. I feel like these might actually just be factory rejects that were put aside and resold later due to minor defects found in QC. I think this because both of my replacements look and perform just like the factory model, but had minor issues. As you can see in the photos, one had some cracking on the front above the face buttons. This is somewhat minor and only really visible in brighter light, but still definitely there. The other had a somewhat bad mura effect on the screen. If you dont know what this is, look up Mura effect Vita and youll see some good reference images - all Vitas have this to some degree, its effectively a minor backlight uniformity issue and is often just a couple small splotches but my replacement has a noticeable streak from the bottom middle to the middle right of the screen that measures ~5cm long and about 2-3mm thick. These oled defects are generally only noticeable in low light, more uniform scenes (like loading screens) and will almost never be noticeable during normal play, especially at a higher brightness. but having a big streak instead of a couple small splotches is definitely enough to be visible in some scenes (like in menus and while playing on minimum brightness). The fit of the replacement was spot on, I had no issues there. Just be aware that replacing the faceplate is a hassle, harder than a PSP but definitely still doable for anyone careful enough and with the right tools - Id strongly suggest looking up a tutorial on YT before diving in, and dont forget to swap over the smaller parts like the plastic for the game cartridge light, silver joystick rings, and 4 thermal pads. Overall Im happy enough with the replacement, as you can see my old faceplate was pretty beat up so this is a major improvement, it just isnt quite factory perfect and your mileage may vary for what defects you end up with (if any.)

Worked as advertised helped me restore a destroyed ps vita to working glory touch screen is responsive and colors are vibrant perfect for any body making repairs.

Read the reviews for the glue stains, still decided to purchase hoping I wouldn’t receive one with glue stains. Unfortunately, I received one with stains in the corners. Other than that, the screen works.

Cant see the bubbles unless the screen is off, not a big deal. Installation was a nightmare, as the screw holes were too small for the OEM screws on the button harnesses, overall, the screen works, but this was a royal Pain to get installed correctly, and Im sure there are better products on the market. But, again, it works, and Im pretty happy. Changing the screen on a Vita isnt exactly the easiest thing in the world, so, lets not dilute ourselves on that note, however, the screw holes being the issue that they are, makes the install much harder than it needed to be.

The LCD screen Performed as advertised. I was able to replaced the screen without issues. All the electronics need to be transferred from the old device to the new screen but they fit well.