Rocaris 10 Pack Flap Wheel, 120 Grit for Rotary Tools，1/8 inch Shank (32X10X3)

Tried these out in my drill and spent about 30 seconds polishing the rust off one half of my vise (see photo for before and after). It worked very well and Ill be using these to clean up a lot of items.

Does what it needs to do. Perfect for the do it yourselfer. Great for woodworking and other forms of hobby sanding.

They work well so far, haven’t used them enough to know how well they will hold up but they do seem made decent, nothing to special or heavy duty . They work for what I needed them for so far. I tested them on sanding a few small pieces of wood I needed done and it worked. Will update review after use if anything changes.

I use these to knock rust off automotive parts. These will fit the bill.

Currently working on refinishing some metal baseboard radiators that were looking tired and rusty. I used these in my Dremel to get at areas a palm sander couldnt get to as well as to focus in on particularly rusty spots as well as decades old paint blobs. Definitely sped up the process and reduced the pre-sanding time as I prepared the parts for new paint. Exactly what I was expecting.

Comparing one of these to some others including name brands, the quality isnt as good. Just looking at them you can see the difference, but they still can do the job. They do seem to wear a bit faster though, but the price is pretty good and if you dont mind changing them out every so often, then they are still a good value.

I use this type of flap wheel all the time and have always purchased the name brand ones. It was just too tempting not to try these when I could get 10 of them for less than the price of two of the others. I was worried about durability. While they do seem to wear down slightly faster than those I had been using these are still a huge bargain.

These sanding wheels are a go-to for using with a dremel. Happy to find a multi-pack for a reasonable price point. They are holding up well to light sanding/carving in soft woods. Overall, a great dupe for the name brand version and much more economical.

Using my rotary tool, I gave it a test on some scrap wood (see photo) and it bit right in. I was able to cut a groove in seconds. So, it seems to me to be a bit more aggressive than 120 grit. I took off a star for this apparent inconsistency. Otherwise, these are a great addition to my rotary set. Better yet, Im throwing a few in my drill bag because I see them being helpful when I do something like deck building. There always seems to be a time you need to take off a little of a bad cut or find a way to get around a proud obstruction. These should do well for that purpose. I did not try it on metal. I see no reason that it wouldnt also take off rust as advertised because these have some serious bite to them.

The 1/8 handles on the 10pk I got were only 1-1/16 to 1-1/8 in length rather than 1-1/4 if that matters. The heads were 3/8 thick and 1-3/16 in diameter though. They fit on my rotary tools just fine. They were similar quality to flap wheels I have had in the past. They come fairly hard, so do note in the product description under tips where they recommend soaking before use. The bottom of the flap wheels is labeled with the rotational speed but is not labeled as 120 grit so I would label them with a marker before use or storing so you will know for future reference. 120 grit is pretty aggressive, so it would be good to do more final shaping on little intarsia wood pieces as well as working on cleaning up rust off metal pieces and such.