Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier
-
MDMatty
> 3 dayOverall the Amp is great, the only issue I had was I bought a brand new PLC2 for it and it didnt work, I returned that one and got another brand new one, same thing, so I am wondering if its an issue with the amp, but that is a minor issue I can live with.
-
Darion Johnson
> 3 dayAlways been a Punch fan!! I have the Rockford P500X1bd pushing a 10in 2ohm Kicker CVT. The sub is in a MTX Bass Slammer enclosure for a 2005 Chevy Tahoe. The sound is clean and there is plenty of power. The birthsheet that came with my amp says 770 watts @ 1ohm. Very easy to setup and get the proper gain for your particular system. Would definitely buy again and recommend.
-
J Harris
> 3 dayThis is amp is down rated! Super powerful!!
-
Lindsay Larson
> 3 daynice, and under rated. said 500 rms at 1 ohm, birth certificate said 830, still nice for the price.
-
hemitruk
> 3 dayNice clean base even at lower volume .Combined with remote level control even fm radio sounds good now.
-
Keith Taylor
Greater than one weekRockford are good quality and this amp say 500 rms but my BC said 766 rms and I know this amp is pushing more than 500 watts, I have it paired to a Rockford fosgate box with 2 12inch P2, boom!
-
Israel
> 3 dayThis is a great amplifier it pushes my fosgate 10 to the limit.
-
Ray
> 3 dayThey push my 2 10in rockford fosgate subs
-
Chris sammons
> 3 dayThis amp is the best you can buy if you were to buy an amp the power is phenomenal lots of strong power and it lasts long long time if you to buy an amp you should get this one or stick with the same brand
-
Mrs. Jessyca Okuneva IV
> 3 dayPerfect amp
Power & Bass On Demand!
P500X1BD
The Punch P500X1bd is a mono amplifier capable of producing 500 Watts into a 1-Ohm load.
Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only.
With its super efficient Class-BD circuit topology, the P500X1bd will drop some serious BASS! The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.
Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.
- Punch 500-Watt Full-Range Mono Amplifier
- Rated Power: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm
- 12dB/octave Butterworth crossover
- Power Wire Gauge: 4 AWG
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Optional Punch Level Control Ready (PLC2 sold separately)
- Recommended Fuse (not included): 80 A
- Dimensions (H x W x D): 2.38" x 7.76" x 11.03"
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is our patented circuit with in/out clip LEDs to help match a source to amp and optimize output
Punch EQ
Delivers more bass where you want it most by allowing up to 18dB of boost adjustment at 45Hz
Multi-Signal Inputs
The RCA inputs of this amp can accept both Hi or Low level audio signals without the need of a signal converter
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| P1000X1bd | P500X1BD | P300X1 | P1000X2 | P500X2 | P300X2 | |
| Number of Channels | 1 | 1 | 1 | 2 | 2 | 2 |
| Total Power (RMS) | 1000 | 500 | 300 | 1000 | 500 | 300 |
| Bridgeable | No | No | No | Yes | Yes | Yes |
| Circuit Topology Class | Class BD | Class BD | Class A/B | Class A/B | Class A/B | Class A/B |
| Cooling | Convection | Convection | Convection | Convection | Convection | Convection |
| Recommended Fuse (not included) | 140 A | 80 A | 50 A | 140 A | 80 A | 50 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 9.86" | 2.38" x 7.76" x 15.03" | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 9.86" |
| Rated Power | 300 Watts x 1 @ 4-Ohm | 150 Watts x 1 @ 4-Ohm | 200 Watts x 1 @ 4-Ohm | 300 Watts x 2 @ 4-Ohm | 150 Watts x 2 @ 4-Ohm | 100 Watts x 2 @ 4-Ohm |
| (or) | 500 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 500 Watts x 2 @ 2-Ohm | 250 Watts x 2 @ 2-Ohm | 150 Watts x 2 @ 2-Ohm |
| (or) | 1000 Watts x 1 @ 1-Ohm | 500 Watts x 1 @ 1-Ohm | 1000 Watts x 1 @ 4-Ohm Bridged | 500 Watts x 1 @ 4-Ohm Bridged | 300 Watts x 1 @ 4-Ohm Bridged |
|
|
|
|
|---|---|---|---|
| P600X4 | P400X4 | P1000X5 | |
| Number of Channels | 4 | 4 | 5 |
| Total Power (RMS) | 600 | 400 | 1000 |
| Bridgeable | Yes | Yes | Yes (front/rear channels) |
| Circuit Topology Class | Class A/B | Class A/B | Class A/B + Class BD (Sub) |
| Cooling | Convection | Convection | Convection |
| Recommended Fuse (not included) | 100 A | 60 A | 150 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 15.03" |
| Rated Power | 75 Watts x 4 @ 4-Ohm | 50 Watts x 4 @ 4-Ohm | 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm |
| (or) | 150 Watts x 4 @ 2-Ohm | 100 Watts x 4 @ 2-Ohm | 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm |
| (or) | 300 Watts x 2 @ 4-Ohm Bridged | 200 Watts x 2 @ 4-Ohm Bridged | N/A + 500 Watts @ 1-Ohm |