SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/2” Thick (13mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

Exactly as specified. Good quality material and description

Product, delivered promptly, perfectly protects wooden telephone table. Wish order could have been made specifically for my exact measurements to get 5 stars. P

3rd purchase of 12x12 Plexiglass. First two were from other companies which did not measure square. One sheet was 11 3/4 x 12 3/16.... However, ordered from this company and the glass was perfect measure, polished edges, and better quality finish. Used calipers to test thickness and machined squared 90 and they were dead on! Thank you guys for making a great product!

Exactly what I wanted

I bought this to use under my air fryer so my counter would not get burned.

I used this to make an oversize sub base for my wood plunge router. This item was 1 foot square. On the bandsaw I cut it into a round shape 1 foot in diameter and drilled the appropriate holes to fit my router. When milling out shallow inlays in wood using a handheld router, it is sometimes necessary to have an oversize sub base to bridge the edges of the recess.

Excellent quality! Exactly as described. It came very well wrapped which kept the surfaces pristine. My order arrived a week ahead of schedule. I am so pleased, I’m going to place another order with this seller again!

got it in good conditions, thanks.

We got several of them and all of them were of great quality. You can literally see thru the acrylic even from the sides. Sides are usually burred from other suppliers. This cuts and engraves nicely with our laser cutter. Only issue is there are minor thickness variations even within a single sheet, but this is not a problem with our use since we cut this further into different shapes with laser. Another problem is the masking sheet that comes with this tends to catch fire in our laser cutter that leaves burn marks in the products that we make, so eventually realized we had to peel them off and replace with a low tack paper mask from another vendor that doesnt catch fire. This is additional work and $ but cant beat the price of this item for 1/2 inch acrylic.

I needed thick hard plastic plate so I could put a router on it. So far its worked great and has not broken in heavy use./