SimbaLux Acrylic Sheet Clear Cast Plexiglass 12 x 24 Long Panel 1/8 Thick (3mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

So I bought a closet organizer for my camper closets. Since they were cloth when you put clothes on the shelves they would give and not hold. I ordered these to make the organizer more sturdy. Worked perfectly!

Covering some feral Cat houses I have.

Flawless! I use these to protect my albums on both sides of the shelves. Not a scratch or mar on either of them. I have 3 at this point, and need 1 more to finish it up. You wouldnt know theyre there unless you get really close.

It looked nice but after a day of use as an aquarium lid, it warped significantly.

A wind storm drove a 6 diameter branch thru our white plastic 9 x 10 patio shed roof. The roof is double walled. I wanted a 12 X 12 strong weather resistant plastic piece to place on the outside and inside of the shed. After cleaning the area up, I used a white marine silicone to attach and waterproof the patch. I am very pleased with this plastic material and company. This fix saved a lot of labor and replacement costs.

I bought this sheet to try etching with a blue-light diode laser. The acrylic performed perfectly through the etching process. The sheet was uniform in thickness and I didnt notice any contouring. There werent any visible voids and the covering kept the faces pristine. Extremely impressed and plan to get more!

I ordered this for box shelf display. Probably thicker than I needed, but super nice and thick. Well protected. Each side had protection, then bubble wrapped in a box. Very happy with these!

As Discribed

Nice well built box vs. arriving with the corners partially open like so often. The product was packed very well to keep it from moving around and both sides of the acrylic had protective adhesive covers. Uniform gloss with no scratches. Was a bit expensive, but it was in stock, shipped, and arrived as promised. So nice when that actually happens!

I purchased two sizes of this, 12 x 24 and 12 x 12. I would have given these 5 stars because they are nice, thick (1/8 inch) clear pieces of plexiglass that arrived in perfect condition. Based on other reviews, I felt confident I could use these as covers for my rimless nano tanks. I was able to use a circular saw, drill and a jig saw to make the cuts I needed to without a lot of hassle and no cracking or scratches. Here’s where the 2 stars come in. Within an hour of setting these on the aquariums they both warped. The centers sunk in and the sides rose up until the edges were sticking up a good quarter inch above the rim of the aquarium. Aside from looking bad, it’s also not good for keeping snails and shrimp from wandering out of the tank. I’m truly surprised that something 1/8” thick would warp so badly since these replaced two much thinner panels of plexiglass purchased here on Amazon from Lexan. The thinner pieces had been on my tank for months with no warping. I only purchased this brand because I wanted a longer piece and it was in stock. Based on how it arrived and how much sturdier it appeared than the Lexan, I right away ordered the 12 x 12 for my smaller nano tank. Very disappointed with the warping and will be going back to Lexan. Pictures are of the 12 x 12 sheet. I had to take the 12 x 24 sheet off for the safety of my tank inhabitants.