SimbaLux Acrylic Sheet Clear Cast Plexiglass 12 x 24 Long Panel 1/8 Thick (3mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

Cuts nice

Purchased these panels for laser cutting/engraving, to use in LED night lights (base lights sold separately, of course). The acrylic cut beautifully, using settings found online as starting points. Resulting images were clean and good quality. There is protective paper on both sides of the panels. Left this in place during cutting (to protect cut edges from possible scorching) and peeled off the uncut areas of paper afterward. Larger areas of backing peeled off easily by hand, then cleaned up small areas of paper backing using a light duty (** non-scratching! **) Scotchbrite / O-Cel-O type sponge under warm running water. Paper peeled right off, leaving an unscratched surface and some really nice, custom made gifts. The images shown are about 7 inches high, and demonstrates how the led lights up the image. Note on the owl image that the edge is a little rough, resulting from my software trying to cut around the owl more than once. My fault in how I imported the image, not the fault of the acrylic panel. The others were nice and smooth after a single pass.

I have a fish tank that I couldnt find a cover for because of its odd shape. I had to buy different sizes to cover the top. This is the ONLY one that was perfect! The correct cut, perfect thickness, I am beyond satisfied!!

I think these will do the job I need them for, but cannot get the protective paper off. Tried to peel, but that did not work. Tried soaking in water and soap for several days, but that did not work. Tried to scrape off, but that did not work. Plus it appears to be leaving the glue. I guess goo gone will be the next thing to try.

I needed plexiglass to tape water color paper onto and this fit the bill... worked great for 8 x 10 paintings... would love it if it came in odd sizes like 12 x 14 as due to the pandemic hesitant to go into stores- sturdier than what I found locally before Covid- product came fast in great shape so very pleased!

I have a set of twelve ten by ten photo frames and one of them fell and the glass broke. This was a perfect replacement and you cannot tell the difference.

A wind storm drove a 6 diameter branch thru our white plastic 9 x 10 patio shed roof. The roof is double walled. I wanted a 12 X 12 strong weather resistant plastic piece to place on the outside and inside of the shed. After cleaning the area up, I used a white marine silicone to attach and waterproof the patch. I am very pleased with this plastic material and company. This fix saved a lot of labor and replacement costs.

TLDR: Good quality, easy to cut, easy to remove paper. These came in and right away I was impressed by the quality. Even though they were 1/8in thick they were quite strong. I used them to replace the metal racks in my mini fridge and they work perfectly. I had to cut them to size using a miter saw. The sheets cut cleanly for the most part. 2 of the corners chipped off but for my purpose they worked. The protective adhesive paper come off very easily if you go slow and work with the paper, not against. The last picture shows one of the sheets which slipped under the guard on my saw while cutting. I suggest putting material under the sheets if you have a 1/8in gap on your saw. I believe this mishap was due to my saw and my skills with the saw, not the material itself. Make sure you wear protective pear while cutting as there is a ton of byproduct. Would purchase again.

Really nice used it for my company to put decals on the Acrylic backboard.Only thing is that it gets scratched really easily but it was super nice on our stand

My only wish is that you could get this in a 24x36 size. The 12x24 was a little narrow to work with.