Sta-Lube Moly-Graph Extreme Pressure Multi-Purpose Grease SL3144 - [Pack of 3] 3 Wt Oz., Extreme Pressure, Multi-Purpose Molybdenum and Graphite Grease

Its grease - it works great. What else can you say about grease? My application was nothing high pressure or temperature so it works just fine.

Nice goopy and smelly for bird house nest pole. Should make predators think twice before climbing metal pole.

I was looking for a substitute for the Lubriplate Mag-1 grease thats recommended for my Toro snowblower auger gearcase. The Mag-1 grease is expensive and hard to find locally. I found this CRC Moly-Graph grease to be a good substitute. One concern I had was that some extreme pressure greases contain sulfur compounds that will attack the copper in the bronze worm gears in snowblower auger gearcases. I called the CRC technical hotline, but they had no test data on compatibility with copper. So I ran my own informal copper compatibility test following the protocol of ASTM D130. I took a strip of clean polished copper, coated it in CRC Moly-Graph, and heated it over a boiling water bath at 100 Centigrade (212 Farenheit) for 3 hours. To my surprise, after 3 hours, the copper showed zero--and I mean zero--visual evidence of tarnishing or corrosion. It was better than the 1a visual reference strip in the ASTM D130 protocol. My conclusion is that the CRC Moly-Graph is very compatible with copper, and therefore will not damage the bronze worm gears in snowblower auger gearcases. However, when switching from a different lubricant to the CRC Moly-Graph, its important to flush out the old lube and get all the old stuff out with brake cleaner, so that any potentially incompatible materials in the old grease/lube dont contaminate the new CRC Moly-Graph. Another benefit of using grease instead of oil in an auger gearbox is that it wont leak past worn seals. However, it can be hard to get the grease into the gearbox. I use a large turkey brine injector syringe (not a baster, a syringe) and use it to inject the CRC Moly-Graph grease into the auger gearbox.

Weighed all 3, all within a half of a gram of each other. Loaded one up in the gun and ready to go. What more can you ask for?

Fantastic product...I use it as a lubricant on both rimfire and PCPs

Works well with small grease gun. It has both molybdenum and graphite so you need to pull a Clinton if it somehow ends up on your wifes new white sofa cover.

Well hell I have to say it. Its greasy and black. Lubricates bearings as well as expected. Should last a very long time.

Great for gear lubrication. Used it on multiple victrola motors. Good quality and long lasting.

Great item,

Good stuff