SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey
-
Tmoney
> 24 hourThe cure time for the resin is nice and quick. My only complaint is after fully curing the models are bit more brittle than other resins, this is a worth while trade off, supports break away cleanly and this resin is nearly half the cost.
-
adam
> 24 hourThis really is great resin. It prints great. The only downside is that the parts are noticeably more brittle than most other resins. I use this resin for larger prints that are thick enough that breaking it is not really a concern, like buildings or large miniatures. Thats where this resin shines, it makes larger prints way more affordable to print. I gave it 4 stars because its not perfect but its damn good especially considering the price.
-
BD0G
> 24 hourPrints well.
-
Pepe
> 24 hourDark grey and grey works great and are high in detail. Quickly was able to calibrate exposure time 1.6-1.8 normal layer time is great. The colored resins for me have always become grainy after a couple of print for some reason. Would not recommend those.
-
Jess
> 24 hourGreen is slightly darker then the photo image. Be away depending on printer exposure times will need to be increased. Also to much increase will result in a tumor growing on the base facing your results until you build enough layers to counter the refraction happening through the translucent. Overall alittle tricky to get perfect but once it’s dialed in and if you can afford to put your object right on the build plate it printed fine. If your looking for dimensional accuracy this might not be your choice but if it’s just an interesting object this green is incredible nice. I also mixed it with there translucent blue and a translucent red at on point with great success.
-
M
> 24 hourI wanted to get a transparent resin that was not as expensive so I wouldnt feel bad about failed prints while learning (and so i can see all the way thru the objects) & this has worked perfectly! no odor when the machine is covered by the UV hood
-
Tony Dixon
> 24 hourMy go to resin for transparent blue although this last bottle seems a little lighter than the last few
-
M.M.
> 24 hourOut of the 5 bottles I have gotten, one seemed to be a different formula with more flexible final prints, but slightly lower print quality. The others so far have produced results on par with Elegoo resin. Ill probably keep buying this as my resin of choice for every day prints, as long as I can get it on sale. If its close to the price of Elegoo resin Id just as soon get Elegoo resin. My printer is the Saturn 8k.
-
richard
> 24 hourI started using Sunlu resin when it was relatively new on the market and I was impressed with the quality and the price. Ive been buying the 1kg grey standard resin. At the outset, I didnt need to change any exposure settings to get crisp detail and clean prints. LATELY though, I feel like the QC of the product has gone downhill quickly. Prints have been failing left, right, and center, on files Ive printed a dozen times before. Failures included failure to get good bed adhesion (yes, after leveling...), ODD failures such as the quality of the supports degrading and ripping in the middle of the supports, and peel cracks in the print where the exposed layer didnt adhere to the previously cured layers. Print detail quality is much softer when I *do* get a successful print, and it takes much longer to wash the print in IPA than it used to, even when using brand new clean IPA. And most tellingly, the IPA gets fouled a lot faster from heavy particulates. I think with some settings tweaking to increase per-layer exposure times this might be an okay resin, but when you have lots of pre-sliced models already on a drive and a cottage business to run, you dont want to waste your time going back to re-slice every single file with new settings. I just went back to my old standby resin. Its more expensive but without changing a single thing on my printer, the prints just started coming out beautifully again. I wish I could use Sunlu but until they address their quality issues (which, again, were GREAT when I started using them!) I just cant afford to waste time and money on failed prints.
-
Schaefers Cookhouse and Cabins
> 24 hourI think that means its his favorite birthday gift.
SUNLU Fast Curing Standard 3D Printer Resin
Nice Printing Result
More works waiting for you to create.
SUNLU 3D Printing Resin
| | Fast Curing | |
| | Various Bundles | |
Easy to Use | Features | Water Washable |
395 to 405 nm | Curing Wavelength | 395 to 405 nm |
| | Fast Curing | |
| | Various Bundles | |
Easy to Use | Features | Can be drilled |
395 to 405 nm | Curing Wavelength | 395 to 405 nm |
| | Fast Curing | |
| | Various Bundles | |
Easy to Use | Features | Super Tough |
395 to 405 nm | Curing Wavelength | 395 to 405 nm |
| | Fast Curing | |
| | Various Bundles | |
Easy to Use | Features | Cured resin |
395 to 405 nm | Curing Wavelength | 395 to 410 nm |
