TEMO Carbide Downcut Inlay Router Bit 1/32 Inch Diameter

Compared to a high priced but that broke as soon as I used it. This but has worked great and still sharp

Got these to do some detail work on my 3018 Prover and they do seem to work as expected. I have used the 1/8, 1/16 and 1/32 so far and they all cut smoothly. Note I am being extremely conservative on cutting depth and feed rates as Im not ready to test the limits of these, especially the smaller ones. I program to cut the main areas with the larger bits then come back and do increasingly tighter profiles with the smaller bits and it seems to work well. Am cutting on red oak right now and they cut smooth and clean.

Used it for some 5mm depth detail work around small lettering in tigerwood. I bought this bit simply to experiment with and based on how thin it is I was expecting to break it immediately. I was very conservative on speeds and feeds on my Shapeoko CNC, and successfully completed my first job. A useful bit added to my collection!

I reduced all the speeds and feeds specifically for this bit to make sure it won’t break in the stock, but unfortunately, it’s very fragile and broke once it touch the stock before even the machine starts moving. I don’t recommend this bit, waste of money and time

This is my favorite bit. I use it on my CNC to cut small stuff with a great amount of detail with minimal sanding. These don’t break unless I do something dumb, like dropping them or forgetting to switch the router on...

using these bit for guitar inlay work.

These work great. I use these on my Shapeoko cnc on wood signs and I’ve yet to wear one out.

I used the 1/16 downcut bits to cut mahogany and maple. The attached pictures show the mahogany, all of which was cut with the 1/16 bit. The maple was largely cut with a 1/8 bit from a different maker, but the small holes in its center were cut with this 1/16 bit. I couldnt be happier with the results. No tearout or chipping at all. I ran the bit at 18,000 RPM and 36 IPM.

wish I would have paid more attention to how short the cutting area was

Arrived the day after I ordered. The set of bits is exactly what I needed.