Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

I was skeptical, but after struggling with my OC 13700K temps despite custom loop I decided to give this a try. No change in ambient, test, or overclock with a 12 degree delta. 12 degrees for a ten minute installation is massive. Cinebench caps at 88 now when I was hitting 100 and throttling previously. 5.7ghz all core and happy.

Literally dropped temps by 20c just by adding this to my i5 12600k.

Was skeptical at first even after watching all the videos online about this but it really worked, dropped my temps by about 5-7 degrees on both my 12th and 13th Gen CPU’s. Recommending this to all my friends!

Easy to install and help with thermals

Works as advertised definitely dropped temps byba few degrees only thig I wish I did not say Intel 12 gen on it not really needed and especially when your using it on a 13th gen

Combined this plate with a very slight undervolt on my 13700k and now its maxes out around 85C as opposed to thermal throttling before. 100% these plates are essential for keeping new Intel cpu temps under control.

I used this on an Intel Core i7-13700K with an ARCTIC Liquid Freezer II 420 for cooling. With the stock frame a few of the cores kept spiking over 100C under load, forcing them to thermally throttle. Since the same cores were overheating every time, it seemed like the CPU wasnt properly mating with the cooler, which is exactly what this product is designed to fix.

Las nuevas generaciones de Intel tienen la característica de llevar temperaturas elevadas, además que el Bracket instalado para soportarlo en la tarjeta madre ejerce una presión asimétrica del CPU a los Pines, esto ocasiona que con el tiempo las temperaturas hagan un Ablandamiento en la superficie total del CPU, no habría problema si el bracket que soporta al CPU ejerciera una presión simétrica sobre la superficie comoleta de éste, sin embargo las áreas con altra presion comienzan a doblarse sobre aquellas que no cuentan con la presión suficiente, al momento de instalarlo fue super sencillo, las temperaturas de mi i7-12700k no superan los 35 grados en tareas simples y a máxima exigencia no supera los 71°C, es una inversión muy buena y prevenir el daño sobre una pieza tan importante como el cpu vale la pena.

I was a little nervous about installing this at first, but it was surprisingly easy. I placed it on my 17-13700K CPU and I noticed my temps went from Mid 40s to high 30s while in windows, and when running Cinebench I went from low 90s to mid to low 80s. Overall highly recommend if youre comfortable with taking apart your computer. Takes less than 10 minutes.

Purchased this for my first Intel build ever. I installed this after using the stock bracket and seeing some relatively high temps. A quick search of Reddit brought up many recommendations for this, so I picked one up. It’s reduced the max temp on my 13700k from around 90c to about 85c with my EK Nucleus 360mm AIO. Definitely worth the cost IMO, even came with free thermal paste. I didn’t use the paste, but it’s a nice touch for sure.