Timber Wolf Bandsaw Blade 1/4 x 93-1/2, 6 TPI

(0 Reviews)

Price
$28.13

Quantity
(10000 available )

Total Price
Share
21 Ratings
18
2
1
0
0
Reviews
  • Carolyn

    > 24 hour

    Timber wolf makes good bandsaw blades. Ive used much inferior ones & theyre not worth it.

  • J V V

    > 24 hour

    Being a frugal (cheap) person, Ive been using the blade that came with my Grizzly 14 bandsaw for several years now. It has always been adequate, nothing more, nothing less. But I got frustrated with the old blade and as it got older and and started to burn the wood, I finally decided to upgrade. Wow... I installed this Timber Wolf blade and I was just astounded how much better this saw was. It cuts faster, smoother and makes tight cuts easy. If I had known what a difference this would be, I would bought this blade as soon as I bought the saw. Make your life better, buy this blade.

  • turnip

    > 24 hour

    I realize that factory/stock blades arent any good, but the one on my Porter-Cable 14 bandsaw was doing okay for me with softer woods like poplar. I finally had to cut some 5/4 Soft Maple, and that was where it just wouldnt continue any more. I purchased this Timber Wolf blade based on the reviews Ive read, and to be honest I didnt truly think it would be THAT good over the old one. Boy was I wrong. This blade sliced through the Soft Maple like it was butter. It cut very cleanly, didnt wander and is much quieter while cutting. I also cut some poplar to give me a true comparison with the old blade and the difference was still night and day. When I need a different size or to replace this one when it wears out, the next blade I buy will be a Timber Wolf.

  • Lester Meckle

    > 24 hour

    I use these blades often sometimes the weld is ant square and they wobble. I just got two in, first one was a nightmare, second one works fine. Initiated a return but honestly, who has time to try and box up 93.5 blade and go drop it off. Ill take the hit because my time is worth more. Looking for a better brand

  • Calvin

    > 24 hour

    6/11/27: best blade - even after over a month of heavy use (pine), is still cuts better than a brand new standard blade from the hardware store. 5/3/17: Sharp, cuts fast. Wide kerf thanks to the set (about 1/16), but somehow it just whisks through without much resistance. Far better than the $12 blades I was buying from the hardware store...I guess that surprised me, becuase I always assumed that a blade was a blade. Broke one blade at the weld after a week - Possibly a defective blade. Seller Refunded and offered replacement - great customer service! Ill keep buying from this seller.

  • B. Roth

    > 24 hour

    I have used Timber Wolf blades for years. The difference between these blades and stock or cheaper blades is night and day - and these are not all that expensive. Will give an old band saw new life. I replaced an old 14 craftsman with a 10 saw (mistake but thats another story). The saw was a mess. After a year or two I replaced all my blades with Timber Wolf. Could not believe the difference. Ran that saw until the duct tape wore out. Now have a Delta 14. Run the stock blade while you wait on your Timber Wolf. Once you change out, you will be amazed.

  • Daniel Smith

    > 24 hour

    As a custom wood worker, I try to keep costs to my clientele down as much as possible(treat others, as I like to be treated).Timber Wolf has developed a band-saw blade, that requires less tension, last much longer & out performs any other steel- wood cutting blade- when I reviewed the recommend installation procedure I honestly was a bit skeptical, but following the directions on the packaging(and taking time to inspect my saw- the tires,using Cool Blocks for guide blocks,insuring proper tracking)I was very pleased w/ the cuts, the longevity as well as the cost.The teeth have a very hard temper, the rib is very sturdy-all in all this produces a high quality, long lasting, easy on my saw(due to less tension & less heat produced)@ a very cost efficient,smooth cutting blade.I use the 3/4 for re-saw the 1/2 & 3/8 will re-saw, but I work w/ some twisted grain & Im a bit old school- a very good blade @ a very good price

  • Lawnmower man

    > 24 hour

    This brand is all I buy for my two band saws. I have never been disappointed.

  • Howard Schaefer

    > 24 hour

    This blade works beyond my expectations. I bought a 1/4 inch blade for close work but tried it for re-sawing and it worked faultlessly. Previously used a 3/4 blade for that and this equals or betters that. The cut side is much smoother (it is a bandsaw though) than other blades Ive used. Just broke it after almost 2 years while re-sawing hard maple, it was getting dull anyway.

  • SCG

    > 24 hour

    I knew the Timber Wolf band saw blades were pricey compared to others list on Amazon. I have a Grizzly 550 saw and the blades fit perfectly and look and feel better than the ones I were using. My last 1/4 blade broke in the middle of a project I was trying to complete so I thought I would try a better brand. The seller shipped much faster than the notification I received when I placed the order and they came well packaged. I also like the detailed explanation Timber Wolf includes with their blades. I give the seller 5 stars and value for the money four stars as I have yet to use them to any extent.

Blade Specifications: 93.5" x 1/4" x 6TPI x .025, .042 kerf; 6.5 degree tooth angle; 5/8" cut radius. Cutting Application: curve, template and pattern cutting or ripping and crosscutting. Timber Wolf PC (Positive Claw) tooth-style blades are primarily used in kiln dry wood applications. They feature the great finish of a skip tooth blade at sixty percent of the feed speed capabilities of a hook tooth blade. The PCs gullet shape and depth increase sawdust removal and cutting speed, while the milled teeth help to reduce consumption of horsepower. The PC also features Timber Wolfs unique 6.5-degree rake angle and special 5-tooth set pattern. All of this means you get a long-lasting cutting blade that glides through the wood and produces an excellent finish. Available in 3/16" to 1" widths and 2, 3, 4 and 6 TPI. Suffolk Machinery Corporation, the maker of Timber Wolf band saw blades, manufactures some of the finest woodworking, metal cutting and saw mill blades in the world. They are made from premium Swedish silicon steel and the highest quality alloys. The blade teeth are milled into a piece of strip steel to produce a finished, razor sharp edge without having to stamp or grind the teeth. Finally, the blades are induction hardened, which allows for more precise hardness throughout the blade. The result is a blade with the perfect balance of steel, width, and thickness, with precision set teeth. What this means for you is a superior cutting blade engineered for exceptional performance and long production life. Made in the USA.

Related products

Shop
( 1785 Reviews )
Top Selling Products