













Triplett AC Line Splitter and GFCI Outlet/Receptacle Tester with 5 Visual Indicators (ET200)
-
Pyles The Beaver
> 3 dayThis thing works great for me. I can easily get my clamp meter around both the 1X and 10X areas no problem. As an added bonus it will measure 220V lines and says it can go to 300V. Its the only one Ive been able to find that does 220.
-
Dave
> 3 dayJust what I needed to keep down the number of electrical toys that I seem to loose/walkaway.
-
Mandryke
> 3 dayThis appears to be substantially the same as several similar units I have or have used. The new thing (to me) is the GFCI testing button. If its not apparent from the picture, the thing that looks like a guard around the GFCI testing button isnt. Im not really sure why its there at all; the button protrudes a few millimeters and takes very little force to depress. So far, Ive successfully tripped a known working in-wall GFCI... and proved to my satisfaction that a GFCI-protected extension cord I bought for cheap from Wal-Mart is probably unsafe / defective(?). (If the GFCI light comes on, probably even for a moment, while connected to a GFCI-protected circuit, its probably time to get a better GFCI. In the case of the extension cord, the GFCI light stayed a bright, solid, ominous red for as long as I cared to hold the button down.) I dont have any out-of-code outlets or appliances Im aware of, so theres a slight question mark about the other functions; it does light the completely correct pattern for all of my known-good outlets, extension cords, etc.
-
TechnoPeasant
Greater than one weekSaved a lot of time replacing all outlets in house
-
Miami Broker
Greater than one weekWorks flawlessly and does not feel cheap. No regrets. Sometimes the lights are not clearly distinguishable under bright conditions but you just use your palm to give it some shadow and thats it.
-
Alexander R. Fernandez C.
> 3 dayExcellent deal!!!
-
Ronny B.
> 3 dayI assume it is accurate on the 1 times but the 10 times is more like 11 or 12 times. Which seems odd. I am pretty sure all they needed to do was loop (or coil) the wire 10 times so that the meter would read 10x the electrons flowing by.
-
Bill T.
> 3 dayThis is an excellent splitter for use with most any over wire meter. It gives consistent, accurate readings regardless of load.
-
Robin Johnson
> 3 dayConvinces customer that coffee pot is bad
-
Thomas
Greater than one weekWell built, works as advertized.