TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

Great product and customer service. Will definitely order their products again!

Your instructions are not clear I have 2 bottles A and B which one is the resin and which one is the epoxy? You have to write in the bottles which is which not just A and B . To this day I dont know what are they.

As other reviewers have noted, there is no way to apply this without the carbon fiber coming apart. The epoxy is also of dubious quality. Overall, stay away - it isnt worth half the listed price.

Just as it was described.

If you are new to working with carbon fiber, here are a few things I’ve learned! This was my first time so I’m sure these are obvious to people who have worked with this material before. First the instruction don’t say it, but remove the yellow string. When you apply the epoxy you want to feather the fiber out as much as possible. Keeping the string on will create weird edges. Apply with a paints brush on small areas at a time, pressing firmly down to make sure the fiber is against the actual surface and not hovering in epoxy. I would try to buy some type of clear film so that you can smooth the surface down while it’s curing. I didn’t and just have a lot of sanding to do, but if you used like cling wrap with painters tape I think you could get a better result! Mark of your area, with the tape, apply the carbon and epoxy, then clickers film over that and smoothhhhh out. It feels strong on my surfboard! We will see!

Did not like the high price for just few items, needed additional, tools (sand paper, brush non sticking paper) to complete job. Used this product to repair bike frame. Its ok.

Tried twice. Mixed one capful of each wouldn’t set up. Tried a digital scale in case that wasn’t precise enough. Still didn’t work. Inside 70° low humidity. Followed directions. Mixed for 5 minutes before applying.

First time doin something like that. Turned out well.

I repaired a carbon fiber spoiler for a bmw. The product worked great and was easy to use

My first order was forgotten, either way the second one was fulfilled quickly. The resin is no good. I ended up using gorilla glue epoxy instead and it works better. Good carbon though