













TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi
-
GABOST
> 3 daythe fiber came badly cut and the two chemicals do not dry and harden the fiber. very poor and low quality. Also when I received the package everything was spilled and the vendor was not responsible for the return and payment of the shipment
-
Alan sunday
> 3 dayTried twice. Mixed one capful of each wouldn’t set up. Tried a digital scale in case that wasn’t precise enough. Still didn’t work. Inside 70° low humidity. Followed directions. Mixed for 5 minutes before applying.
-
Solomon Worthey
> 3 dayI got this for my friend and me to practice on it for a big project. So far we had a lot of fun with it.
-
Allyson Smith
> 3 dayThis kit would probably be fine to cover an object for esthetics, but it is not a structural kit by any means. The epoxy is useless and provides no rigidity. The carbon fiber has tape on all the edges which becomes waste. The carbon fiber contains no binders and it’s impossible to work with, and is a pain to cut to size.
-
Soledad Schinner
> 3 dayGood
-
Shawn
> 3 daymixed 2:1 by weight, wont cure at all. Terrible product.
-
snype
> 3 dayRepaired my CF Front lip. In humid ass Florida though 48 hours cure time min.
-
Natman
> 3 dayAnother victim of the epoxy not setting up and hardening after seven days. I followed their mixing instructions exactly. I’ve been mixing up epoxy for various projects for many years and have never had a problem like this. Ruined my project and left me with a huge, sticky mess. Carbon fabric seemed fine but I’ll never truly know. If you must try this product despite many of us have this same experience, please test it first on something that will be discarded anyway.
-
Rad Bike ShredGnar on you toob.
> 3 dayCheck out Rad Bike ShredGnar channel on you toob. Video up of damage and repair.
-
RV
> 3 dayContains more than enough material for most bike repairs. Does not include the compressive heat shrink tape. Also not that you should add hardener for the temps the item will cure in. I had to go 3-1 because of the cool conditions I was working in. 2-1 is fine when its 75*, not so much when its 65*.