Woolwax Pro Undercoating Gun by Kellsport

The spray gun does not come with a 1/4 pipe union-coupler, which is needed to install an air line fitting. Id gladly pay an extra $1.00 for the spray gun to have this fitting included. I found out the hard way that zip ties need to be installed on the wand extensions. I was pulling the 360 degree wand out of a body access hole as I was spraying, and the wand came apart and I got a face full of Fluid Film. I have seen reviews complaining of too much overspray in the air. I found 85 psi of air pressure and adjusting the wand for more product flow drastically cuts down on overspray.

I thought I knew how to use a spray gun. Read the instructions

At first the gun would not spray at all! Lots of air coming through but no fluid film! I almost gave up and returned as defective! Then bam! Adjust the nozzle to not tighten all the way and it started shooting! This needs to be on the faq because I’m sure im not the only one. As for functionality, gun shoots great! However, the spray wand was kind of weak and not as effective like a few other reviewers have mentioned—might need a stronger psi for that. I was using around 70psi. It’s pricy for what it does. Otherwise, great product!

bought this to use with my fluid film and it works wonderfully. i set my compressor to 80psi and it sprays well. you do have to unscrew the end to get the spray to come out. the hoses work well to get into the doors, frames, and other crevices the multi way hose works best for the frame and the straight hose works best for the hard to reach spots. whe additional bottles are nice to fill and use after you are dont with the first one. and the casps are nice to store any additional remaining product.

Used to apply Fluid Film that was purchased more economically than through Amazon. Applied to 2 vehicles so far. Works very well. Used to preemptively prevent New Hampshire Seacoast rust on a 19 Silverado 1500 that I plan on keeping 20+ years. Hit Youtube and call Fluid Film if youre uncertain about how to do this. Fluid Films Customer Service is exceptionally helpful.

Used with PB Blaster Surface Shield, product worked well to spray both the under carriage and inside the frame. Would have liked one more attachment for gun like a 30 degree extension, but overall worked good. If it holds up would recommend.

For the price you can’t go wrong. Worked as I hoped it would. Used for fluid filming my vehicles. Read directions!! The tip is meant to be loose. The looser you operate it the more material comes out. It won’t leak because it is loose. Mine operate best at 80-90 Psi.

I purchased the pro series gun after using the cheaper entry level one. It is a huge upgrade, the extensions that come with it are great too. If your considering buying an undercoating gun, just buy this one to begin with. It sprays the product (wool wax) so much easier and more efficiently than the cheaper version.

These guns are cheap! The product Fluid Film is great, upgrade the sprayers!

Fast shipping item as described