Woolwax Pro Undercoating Gun by Kellsport

Worked as it should

Cant believe how well this unit disperses thick lanolin. Does it with infinite adjustment and never seems to balk or sputter. Very impressed. Wish it didnt cost so much, but I guess you really do get what you pay for.

I went through 3 different guns before I ponied up for this one. I should have purchased this first. Atomized the Fluid film perfectly. No mess. Easy clean. I sprayed my 40 foot RV and only used 1-1/2 quart. This gun is dialed in for any wool wax application.

great money saver, no splash at all

bought this to use with my fluid film and it works wonderfully. i set my compressor to 80psi and it sprays well. you do have to unscrew the end to get the spray to come out. the hoses work well to get into the doors, frames, and other crevices the multi way hose works best for the frame and the straight hose works best for the hard to reach spots. whe additional bottles are nice to fill and use after you are dont with the first one. and the casps are nice to store any additional remaining product.

Forget the cans if youre thinking about undercoating, this gun makes it quick work with MUCH less mess from the adjustable nozzles. 80-100 psi from a 2.5gallon compressor worked just fine with 3-5 second bursts. Took off a star because for the price a QD or two would have been nice. Do yourself a favor and get a right-angle connector so it will sit flush on the ground more easily. The 360 nozzle works fairly well, but youll want to make your first pass with the straight nozzle.

The gun works well as long as you follow the directions that come with the kit. You do not want to thread the nozzles all the way on. If you do, it wont release any product. Just 3 to 5 turns and it works fine. I ran about 80 psi & the atomization of the fluid was very good. If you run too low a pressure the product tends to dribble more than spray. Definitely worth the money. Lastly, be careful with the gun, it is made out of a cast material & might crack on you if bang it hard on your vehicles frame or you drop it on concrete.

Used this spray gun with Fluid Film and it works great. Set the compressor air pressure to 80 psi with good results. Be careful not to kink the spray tubes as the gun relief valve will spill over creating a mess! The plastic spray tubes are stiff and kink easily so you need extra space to work to avoid that. Tubes fit into most areas of the frame and body of vehicles. Already did three vehicles and it works very well!

I used this and it works just fine. I used the hose with the big opening and I used it for the whole application.

works great