











Woolwax Pro Undercoating Gun by Kellsport
-
scott cole
> 24 hourgreat money saver, no splash at all
-
Kevlarster
> 24 hourI ran fluid film through this on a 60° day but I did heat up the fluid film by putting hot water in 1 gallon Ziploc baggies. It worked very well. I would recommend this product
-
F.K
> 24 hourGreat for getting hard areas
-
Andrew
> 24 hourBrief learning curve but works like a charm. Excellent.
-
llama land
> 24 hourI have sprayed approximately 1/3 gallon of Fluid Film on two vehicles using this gun and it worked very well. Very easy to adjust the volume of material being sprayed and the two different length extension hoses allow reaching into otherwise inaccessible areas. The sprayer and parts all seem to be high quality (made in Italy).
-
C. Smith
> 24 hourTook some fiddiling with the settings but worked great with a fairly small compressor
-
Rich from Ohio
> 24 hourI finally got around to using this spray gun. Im a novice and this is the first time applying any kind of undercoating. Ive watched many tutorials before giving it a try. I used this on a 2002 Ranger. I have a 2 gallon compressor and set the regulator on 80 psi. Fluid Film is pretty thick and I had my doubts that I would get a spray like the ones in the tutorials. I was pleased that the gun performed as shown in the videos. I had the Ranger on ramps, so I was working with limited head room. The tube attachment solved the problem of limited head room and pointing the gun at hard to get to places became a non-issue. It took me about 2 hours and a little over a half a gallon of Fluid Film to complete the job. I put plastic down on the driveway to catch drips and over-spray. I didnt need it. Im giving this gun a five star rating because it performed flawlessly as advertised. I highly recommend this product.
-
Nick Fornicola
> 24 hourThe spray tip that comes on the bottle is a good tip, but the wands leave a lot to be desired. The 360 degree tip only sprayed out of 4 of the holes and the other wand has a terrible spray pattern. Both wands leaked product where the hose attached to the brass fitting that connects to the bottle. I had to put hose clamps on them both to keep them from leaking product everywhere.
-
Dave
> 24 hourProduct is nice but I wish it came with straight wands as well as the flexible
-
Marcel P. Lemay
> 24 hourFlows really good with just the short tip. Flow slows way down when using an extension tube. I can spray at 40 pounds at the gun with just the short tip, but gotta crank up the pressure to 75lbs to spray through the extension wand. Heating up the fluid film in a bucket of hot water helps a lot with flow. I heard you can thin it down too with diesel fuel if need be. This is a good gun for spraying fluid film and it is well made, not junk.