YOTOO Hybrid Air Hose 1/2-Inch I.D. by 50-Feet Long 3/8 inch MNPT Solid Brass Fittings 300 PSI Heavy Duty, Lightweight, Kink Resistant with 3/8 and 1/4 Industrial Quick Coupler Connectors, Gray

This air compressor hose was much more heavy duty than I was expecting. It should hold up well for use around the garage. I wish my longer hose was as good quality as this one.

Well made lead line to go from the compressor to the wall lines. Note, this is the large fitting line! Will not fit your regular standard fittings. This line is meant to carry more flow to the hard lines throughout your garage. Be prepared to to have matching fittings on the compressor and the hard lines. I took a picture of the regular fitting next to this one, I hope it helps.

I got this for my new 1 torque wrench that requires a half-inch air line. The hose is as high quality as any I own, it did not kink during use, and it looks to be a very durable unit that will serve this purpose quite well The hose fueled the big impact quite well. My one problem is that my compressor isnt big enough to keep up with heavy use, so I need to take a break after every dozen or so ugga-duggas. Finally, for some reason, I did not receive the package of extra connections and fittings that the other reviewers showed in their reviews. Odd.

This is not your typical home-shop lead-in hose. Using 3/8” couplers, it won’t mate to your consumer grade 1/4 air couplers. No, this is meant for a high-volume large reservoir compressor to reduce transfer losses from the tank to the hose reel, for instance. It is perfect as a whip hose for a 1” air gun or as the supply line to a tire changer to facilitate fast fill up for the bead seater. This assumes, of course, that the rest of the air plumbing in the shop can keep up. The hose claims to be “hybrid” composition of rubber and PVC, and this makes it more flexible than I expected for such a beefy air hose. The end couplers look to be of excellent quality and are steel instead of brass to add durability. A strain relief at each end prevents kinking and should also prolong the life of the hose. I have another Yotoo brand 3/8” hose that gets dragged across the shop floor, run over, and pulled from across the shop and shows excellent abrasion resistance and durability. I fully expect this one to do just as well. This is an excellent brand.

Its not the fault of the seller, but this has 1/2 fittings, not the 1/4 fittings common to most pneumatic tools and compressors. I guess I wont be using this to connect my compressor to my hose reel. Seems well made though.

Quality is generally lacking in air hoses however the manufacturer has gone all out on this hose extension with high quality connectors, solid clamping to the hose and a somewhat flexible plastic sheath covering about 2 of hose and 2 with the crimp to the hose. It is very different from an inexpensive hose and I would think that in a garage setting with heavy use this would way out last a plain hose with connectors on it. The covering of the end of the hose and the crimp looks as if it would survive being run over or other mishaps that occur in shops frequently and so a user should expect a fairly long life from it

Just received the hose so cannot evaluate durability. Seems well made. Flexible enough to be able to coil and seems it can be used easily when extended.

The larger diameter hose and connections are perfect! These are 3/8 (larger than standard 1/4) which allows more airflow through the lines. We are using this as a flexible hose between our air compressor and the fixed wall PVC pipe. High flow, good quality fittings, flexible but firm. Couldnt be happier.

So this hose seems good quality. Im using it from my air compressor to my hose reel in my garage and have had no leaks or issues. It came with some teflon and a couple air fittings. Not much else to say really. Its a short air hose. Most will use a 5/16 or 1/4 hose. 3/8 is pretty big so double check what your compressor runs best with.

This 25 hose was gotten to replace one that is leaking on my air compressor in the shop. This one is very robust, although the 25 length and large size can cause issues (in the way, trip etc.), it is a must when using air tools. The fittings are of decent quality and the hose isnt too hard to move around. As stated though it is 1/2 inch which makes it non-typical of the hoses generally used with pancake shop compressors. The included fittings, along with the thread tape are a nice touch. I did not get a hose with my brand new shop compressor, as such I used an old one from the bad compressor which is now leaking too badly to keep using. This hose replaces my old hose on the new compressor. I tested it with my 20 ton air jack and it worked well. Highly recommend this.