Zalman I3 NEO Black Edition Airflow ATX Computer Case with Mesh Front Panel, Magnetic Swing-Open Tempered Glass Side Panel, 4X RGB 120mm Fans Pre-Installed, Mid Tower for Gaming or Office Work

(200 Reviews)

Price
$47.99

Color
Quantity
(20000 available )

Total Price
Share
54 Ratings
35
12
1
0
6
Reviews
  • john a fragano

    02-06-2025

    In 25 yrs I built over 400 units, I have completed a computer in 30 minutes and other times 1 hour. This case is CASE FROM HELL!!!! After doing all my connections, unable to mount in case. Standoffs DEFECTIVE!!, SCREWS WOULDNT FIT, OR GO IN AT AN ANGLE AND WOULDNT COME OUT. HAD TO UNWIRE BOARD take out, replace all standoffs, and new screws. Waste of over 4 hours wiring and un wiring , and still hard time to install, Im GREAT at what I do. This case made me look like a 1st NOVICE TOOK AND THREW OUT THE WINDOW WHILE FOING 80MPH, JUST PUNISHMENT FOR THIS CASE!!!!! Thank God Amazon REFUNDED MY MONEY, and was able to get new case, and 30 minutes later computer was done. John F from New York

  • Defalt

    > 3 day

    There is just enough space to connect the front panel cables, the cable management its not the best but it works, the fan at the back has a short cable so I had to plug it directly to the motherboard in the front which makes it a little ugly to see but it works. Other than that, seems a good case.

  • Israel

    > 3 day

    The overall design of this is great, it looks great. The door is the best thing I never knew I needed on a computer case, and Ill never buy a case without it. The cooling is great and the pre-installed fans work well for my Ryzen 7 3700x and 3060 Ti. However, the back PCIE slot holes are punch-out and cannot be put back in. This means that if you install a secondary PCIE device and uninstall it, you are stuck with a big hole in the back of your case. Another con is also with the back of the case. The screws are near impossible to actually get properly threaded into your GPU or other PCIE component. It takes me a solid 10 minutes every time to my GPU screwed in after taking it out, making me dread doing it every time I need to. Overall this is a really well priced case, and well designed. Apart from the few problems I have with it, Id recommend it to anyone on a budget for building their PC. Also the door. I love the door. Always go with the door.

  • arctic nerd

    > 3 day

    The first time I popped the front screen off as per the diagram in the manual, one of the plastic tabs broke off. Other than that, the metal is sturdy, theres plenty of room for a CPU cooler and a large Graphics card. Pretty good amount of space for cable management, The fans are quiet, although the LEDs arent addressable. Pretty decent as long as you can tolerate the rainbow aesthetic. Customer service is fantastic. They helped resolve the issue quickly..

  • Alfredo

    > 3 day

    Todo perfecto, caja, case, vidrio, fanes, etc. viene con todo lo que necesitas!

  • febots

    > 3 day

    Maybe I did something wrong but I wish the rear fans cord wasn’t in the way of the fan itself. Other than that perfect case.

  • Lizzy

    > 3 day

    Missing a usb port to connected keyboard and mouse

  • Wesley

    > 3 day

    Let me start off with the packaging, this case came in a normal PC case box but what threw me off was that it came with this squishy foam-like material which in my experience was great. Unlike most cases that come in squeaky foam, this one does not break off easily and protects the case very well. Let me start off with the things I like most about this case. 1) The glass is on hinges which is very nice for convenience when switching out parts or even adding a little figure inside the PC. 2) The case comes with four RGB fans that are included so you dont have to buy fans would work perfectly fine with putting one of the front fans on top. 3) This case has a very nice hard drive and SSD tray that you can pull out without having to use any screwdrivers. 4) On the back where it comes with screws, it includes a glass cleaner wipe, USB plugs so dust doesnt accumulate, and extra GPU brackets so if you decide you want to switch out your motherboard it wont have a hole on the back. 5) This case also has a big spot on the top so you can mount bigger or smaller fans. 6) It also has very good airflow because of the mesh front. 7) Has enough space in the front of the PSU and the glass to put a sensor panel if you wanted to add one because I personally have not seen this on another product. The market doesnt have this design leading people to put the sensor panel on top of the PSU shroud or on the back exhaust fan spot. Now for the things I wish this case has. 1) A bigger space to put more hard drives or SSD because even though the spot for the hard drive, there is only one so the max amount of hhd and SSD you could fit is three. One on the back of the motherboard, two on the hard drive case near the PSU, and two in the front but for the ones in the front, those are a bit harder for the cables to reach and the cable management for the cables wouldnt be as pleasant to see. 2) The other thing is that when routing the cables in the back, it was a little difficult because the cutouts are very close to each other so this leave holes and if you have some cables that are not long enough, then youd have to run it up against the holes. Overall, other than these two things that I have listed above, this case is amazing to build and look at and doesnt feel cheap. If you are buying a case/ or looking for a case for your next build consider this one to be one of your top PC cases.

  • Tv

    > 3 day

    I got the case its perfect just had a fan that would make noise every so often I smack it and it temporarily fixes it I dont recommend my methods of repair

  • Angel Rodriguez

    > 3 day

    Overall this is a great case but Is missing a front fans dust filter but besides that I recommend it to everyone

I3 Neo Black Description 1I3 Neo Black Description 1
I3 Neo BKI3 Neo BK

Zalman I3 NEO Black

ATX MID TOWER COMPUTER CASE

Experience the ultimate combination of style and functionality with the new I3 NEO Black Edition ATX Mid-tower case. Get the perfect balance of form and function without sacrificing performance - all at an unbeatable value.

  • Hinged Glass Side Panel
  • Full Black High Airflow Mesh Design
  • 4x Pre-Installed ZALMAN RGB Fans
  • Removable Magnetic Dust Filter
  • Spacious Interior

magnetic filtermagnetic filter

zalman pre installed fanszalman pre installed fans

tempered glass paneltempered glass panel

i3 neo black portsi3 neo black ports

Magnetic Dust Filter

Keep your build running smoothly with the Magnetic Dust Filter.

The top filter is magnetic for easy removal and cleaning. The bottom detachable filter ensures your system stays dust-free.

4x Pre-Installed RGB Fans

Add some flair to your build with 4 pre-installed ZALMAN RGB fans, from front to rear. Whether you"re gaming, working, or just using your PC, the lightshow created by these fans will leave a lasting impression.

Hinged Glass Side Panel

Experience effortless style and functionality with the beautiful, full edge-to-edge tempered glass design. Swings open for quick access to your interior components, making installation and cleaning a breeze.

User Friendly Case I/O

Designed with the user in mind. With easy access to all your ports and buttons, connecting your peripherals has never been easier.

Power Button, Reset Button, HDD/Power LED, Microphone Jack, Headphone Jack, USB 2.0 Port, USB 3.0 Ports

i3 neo black detailsi3 neo black details
i3 neo black radiator and fani3 neo black radiator and fan
i3 neo black motherboard capacity configurationi3 neo black motherboard capacity configuration
Model i3 NEO BLACK
Case Form Factor ATX Mid Tower
Dimensions 422(D) x 219(W) x 484(H)mm
Weight 5.6kg
Materials Plastic, Steel, Tempered Glass
I/O Ports 1 x Headphones, 1 x MIC, 1 x USB 2.0, 2 x USB 3.0, Reset Button, Power Button

Related products

Shop
( 637 Reviews )
Top Selling Products